JK32SHO aka the cisco kid

KT Silver Member Username: Kingtutus Lincoln, Nebraska U.s.a Post Number: 339 Registered: Dec-07	Posted on Friday, July 11, 2008 - 06:03 GMT the box u made for Quentin sucks. the screws used only where 1 inch and barley went in to the sides. the box feel apart easily
TWiZTiD Gold Member Username: Joebruce TC Sounds/DLS Post Number: 2218 Registered: May-04	Posted on Friday, July 11, 2008 - 06:10 GMT WTF?
Cozce Bronze Member Username: Cozce Post Number: 92 Registered: Mar-08	Posted on Friday, July 11, 2008 - 06:11 GMT x5
KT Silver Member Username: Kingtutus Lincoln, Nebraska U.s.a Post Number: 340 Registered: Dec-07	Posted on Friday, July 11, 2008 - 06:31 GMT wtf spammer be gone
Canaan Gold Member Username: Southernrebel Monroe, Louisiana 2 DD3515s, 2... Post Number: 6510 Registered: Mar-04	Posted on Friday, July 11, 2008 - 14:30 GMT One dollar Bob.
Chad Lee Diamond Member Username: Bestmankind Post Number: 21709 Registered: Oct-05	Posted on Friday, July 11, 2008 - 16:00 GMT ELVIS IS ALIVE!!!!
KT Silver Member Username: Kingtutus Lincoln, Nebraska U.s.a Post Number: 341 Registered: Dec-07	Posted on Friday, July 11, 2008 - 16:14 GMT wtf
SomeDonnieDude Gold Member Username: Somedonniedude Illinois United States Post Number: 1828 Registered: May-07	Posted on Friday, July 11, 2008 - 21:03 GMT How did it come apart? Got any pics?
KT Silver Member Username: Kingtutus Lincoln, Nebraska U.s.a Post Number: 345 Registered: Dec-07	Posted on Friday, July 11, 2008 - 21:11 GMT the hole top lifted right off. srry no pics, i already fixed it
SomeDonnieDude Gold Member Username: Somedonniedude Illinois United States Post Number: 1829 Registered: May-07	Posted on Friday, July 11, 2008 - 21:21 GMT Did it get battered in shipping?
SGDenny Silver Member Username: Gh0st_31 USF, FL USA Post Number: 782 Registered: May-06	Posted on Saturday, July 12, 2008 - 00:18 GMT As far as i know there are screws and glue that hold his boxes together so the question is what did you do to make it come off? ;)
Naledge Gold Member Username: Naledge503 Portland, Or Post Number: 4056 Registered: Jun-06	Posted on Saturday, July 12, 2008 - 00:45 GMT Why didn't Quentin make this thread? And it seems as if this thread was made without contacting him first....why?
KT Silver Member Username: Kingtutus Lincoln, Nebraska U.s.a Post Number: 346 Registered: Dec-07	Posted on Saturday, July 12, 2008 - 02:56 GMT case i bought the box and might be buying the fi q from him to
SomeDonnieDude Gold Member Username: Somedonniedude Illinois United States Post Number: 1834 Registered: May-07	Posted on Saturday, July 12, 2008 - 13:40 GMT I doubt it just came apart. The glue does more work than the screws do, and I doubt JK didn't use glue.
the cisco kid Gold Member Username: Jkidder Worlds gunna end, In 2012 Post Number: 3657 Registered: Nov-05	Posted on Sunday, July 13, 2008 - 12:23 GMT you mean the scotch tape didnt hold it together? gtfo, show me some pics of the terribleness of my box and i'll gladly build you another free of charge. the only problem it had was i slipped when cutting the bottom baffles sub hole. it was repaired before shipping but didnt look the best. it was covered with another baffle anyway so you could only see it from the side if there was no sub. the cisco kid
KT Silver Member Username: Kingtutus Lincoln, Nebraska U.s.a Post Number: 347 Registered: Dec-07	Posted on Sunday, July 13, 2008 - 22:38 GMT the glue and the srews didnt hold it the top came right off
Rob Gold Member Username: Th3pwn3r I compensate... Post Number: 8334 Registered: Jul-06	Posted on Sunday, July 13, 2008 - 23:07 GMT "the glue and the srews didnt hold it the top came right off" Quite possible if the screw holes weren't pre-drilled or were stripped out. Where is your proof of this though? How do we know you didn't do something really retarded to make it come off?
Quentin Gold Member Username: Kingandsons07 Lincoln, NE TEAM RD U.S.A Post Number: 1071 Registered: Feb-07	Posted on Sunday, July 13, 2008 - 23:15 GMT hahahahaha "you didn't do something really retarded to make it come off"
KT Silver Member Username: Kingtutus Lincoln, Nebraska U.s.a Post Number: 348 Registered: Dec-07	Posted on Monday, July 14, 2008 - 00:31 GMT well u can ask Quentin he say the screws in the box they didn't even go through the in to the side to hold the box together

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us