Silver Member Username: O0airjordan120oPost Number: 369 Registered: Sep-07 | ok just got mine today from fed ex... i open all the sht up and start checkein out the amp... i realize there are 2 outputs in the back for speakers... i must have MONOBLOCK and 2CHANNEL amps mixed up in what they meen or somethin... soo im like ok i just have to bridge right? well i look at the diagrams and its got the - linksd with the other - and same goes for posotives... ook.. kinda confused but still with it... accept for now i read that its 1 ohm stable minimum but only 2OHM STABLE LINKED?? wtf. idk im confused. how do i wire this bsterd to 1200 watts, 1ohm to a 2ohm dvc???? and can someone explain the while monoblock vs 2(3,4) channel amps? |
Gold Member Username: SouthernrebelMonroe, Louisiana 2 DD3515s, 2... Post Number: 6230 Registered: Mar-04 | The AQ1200 is a monoblock amp. It just has 2+ and 2- on the side to allow you to wire multiple subs to it easily. They are connected internally. When it says 2ohm linked, it means when you have to amps. You bridge those 2 amps together at 2ohm and each amp actually sees 1ohm. Just wore your DVC 2ohm sub to 1ohm and hook it to 1+ and 1- on the amp. Thats it. |
Gold Member Username: Philly306New quote coming soon, North carolina Post Number: 1011 Registered: Apr-07 | most monoblocks come with 2 positives and 2 negatives to offer more wireing options. you just need to use 1 positive and 1 negative. don't worry about the linakable part. that is only if you have two of the amps you can link them. just put both positives in the pos and both negatives in the negative |
Gold Member Username: Big_edge_headMilwaukee, Wisconsin MY SUBS GET ... Post Number: 1769 Registered: Mar-07 | Just use one side of the terminals, don't put the wires in as if you were bridgeing you dont need to do that. If you use all 4 it will internally bridge it to 1ohm |
Gold Member Username: Denali_on_22sI get Bucks like Milwa... Post Number: 4895 Registered: Feb-06 | I would say the exact same thing as canaan phil and steve but ill refrain. |
Gold Member Username: SouthernrebelMonroe, Louisiana 2 DD3515s, 2... Post Number: 6231 Registered: Mar-04 | I beat ya...all of ya... *maniacal laugh* |
Silver Member Username: O0airjordan120oPost Number: 371 Registered: Sep-07 | wait. its not puttin out sound... wtf. the sub is a 2ohm. dvc. so my understanding is wire posotive of amp to + of voice coil#1 then - of vc#1 to + of vc#2 then - of vc#2 to amp -... right? that should be 1 ohm? but for some reason i turn on my amp. power lights on. ground is attatched. every wire is good but no sound? |
Gold Member Username: Stateprop486PA Post Number: 1259 Registered: Jan-08 | rca wires hooked up? |
Gold Member Username: Snarl2004Digital Design 9515, Massive Audi... Post Number: 2342 Registered: Dec-06 | is the gain set? settings on the hu correct? how to wire it: http://www.the12volt.com/caraudio/woofer_configurations.asp?Q=1&I=22 |
Gold Member Username: SouthernrebelMonroe, Louisiana 2 DD3515s, 2... Post Number: 6232 Registered: Mar-04 | No. Wire both + on the sub to the + on the amp. And both - on sub to - on amp. |
Gold Member Username: Van_manBoston South, MA Post Number: 3748 Registered: Mar-06 | did you plug rcas in? is the sub out on the HU turned on? Gain adjusted? wearing earplugs? idk, recheck it all. |
Silver Member Username: O0airjordan120oPost Number: 372 Registered: Sep-07 | wooooops. rechecked it and its cuz i have it wired to 4 ohms.... BRB. |
Silver Member Username: O0airjordan120oPost Number: 373 Registered: Sep-07 | nope. i lied. still no sound. |
Gold Member Username: SomedonniedudeIllinois United States Post Number: 1313 Registered: May-07 | Is the amp on? have a good ground? |
Silver Member Username: O0airjordan120oPost Number: 374 Registered: Sep-07 | yes, yes. amp lights on. groundds good. all the wires are good. everythings connected... when i connect the remote bass knob for a split second the sub plays then stops |
Silver Member Username: DjlPost Number: 133 Registered: Sep-06 | What are your filters set at? |