New member Username: Johny0342Post Number: 1 Registered: Mar-08 | hi i have purchased fli 12" twin passive subwoofers and am wondering on the type of amp to buy for these to get plenty of kick out of them and if i will need a power cap and what gauge wiring to use and would it be better to run to seperate amps and if so how would i wire them. any help please johny |
Silver Member Username: Vc23Fi , 2 12 Fi Bls U.s.a Post Number: 307 Registered: Mar-06 | do you have 2 subs or just 1, whats the wattage per sub... rms.. not max, and and whats the coil config...and a budget would be helpful |
New member Username: Johny0342Post Number: 2 Registered: Mar-08 | hi there is a total of two subs which both individually have 1000w rating at peak and have a rms of 300w as for cones and coil all i know is (alarge 1 piece Polypropylene PP cones) my budget for the amp is £100 - £130 maybe slightly more above is the two subs in there box |
Gold Member Username: Stateprop486PA Post Number: 1252 Registered: Jan-08 | ummm i never heard of FLI subs but i heard of FI..... |
New member Username: Johny0342Post Number: 3 Registered: Mar-08 | the subs are made by vibe, fli is just like another product range of vibe audio |
Gold Member Username: Denali_on_22sI get Bucks like Milwa... Post Number: 4887 Registered: Feb-06 | what impedance are the subs coils? |
New member Username: Johny0342Post Number: 4 Registered: Mar-08 | sorry to seem dumb but what do you mean by impendance... the only things i kknow about the subs can be seen here http://www.fliaudio.co.uk/index.asp?page=flitraptwin.html&side=s-frequency.html& sidemore=s-flitraptwin.html |
Gold Member Username: Denali_on_22sI get Bucks like Milwa... Post Number: 4890 Registered: Feb-06 | get an amp that will push do 300 x 2 @ 2 ohms.. thats what i got from the site. they don't mention a particular impedance of the subs, i assume they are dual 2 from the wiring diagram. if you are serious about learning more about audio the check outs bcae1.com. I would also read the12volt.com |