Silver Member
Username: Kingandsons07 Lincoln,
Nebraska
U.S.A
Post Number: 589 Registered: Feb-07
Posted on
Thursday, January 24, 2008 - 14:25 GMT well i got the Q it hits hard but i know it can get louder i got a us amps xt-2000d on it i tryd a kicker sx1250.1 on it. it hit harder but it didn't sound good it wasn't picking up the low's like late night tip
Platinum Member
Username: Bestmankind RD 1000.1D with SI MAG...
Post Number: 17280 Registered: Oct-05
Posted on
Thursday, January 24, 2008 - 18:01 GMT so you are saying the kicker hit harder than the us amp but the us amp sounded better? or is the other way around?
Silver Member
Username: Ska Post Number: 195 Registered: Jan-08
Posted on
Thursday, January 24, 2008 - 18:36 GMT i think the kicker just wasn't tuned correctly
Silver Member
Username: Kingandsons07 Lincoln,
Nebraska
U.S.A
Post Number: 593 Registered: Feb-07
Posted on
Thursday, January 24, 2008 - 18:55 GMT you got it chad so i got the us back on it. i was thinking about a zx1500 but the ssf is preset to 15 i think thats a good amp. i was thinking about putting a saz-3000d on it till i get the money for the dd's or two saz-1500 but the would cost me more in the long run so will i be ok with the saz-3000 on it
Platinum Member
Username: Bestmankind RD 1000.1D with SI MAG...
Post Number: 17288 Registered: Oct-05
Posted on
Thursday, January 24, 2008 - 19:49 GMT well quentin told me the other day he messed with it long enough to know how to tune. i assume you are running 2 subs. i think the saz3000 is cool. but i have never seen a saz3000 lol.
Silver Member
Username: Kingtutus Lincoln,
Nebraska
U.s.a
Post Number: 108 Registered: Dec-07
Posted on
Thursday, January 24, 2008 - 20:24 GMT no only one FI Q.
Platinum Member
Username: Bestmankind RD 1000.1D with SI MAG...
Post Number: 17289 Registered: Oct-05
Posted on
Thursday, January 24, 2008 - 20:30 GMT why do you want so much power for 1 Q? is it dual 1ohm?
Silver Member
Username: Kingtutus Lincoln,
Nebraska
U.s.a
Post Number: 109 Registered: Dec-07
Posted on
Thursday, January 24, 2008 - 20:42 GMT i don't know y he wont to put so much power on it no dual 2 ohm
Platinum Member
Username: Bestmankind RD 1000.1D with SI MAG...
Post Number: 17291 Registered: Oct-05
Posted on
Thursday, January 24, 2008 - 20:44 GMT so he only needs an amp that does 1000wrms at 1ohm for that sub. don't get greedy. lol.
Silver Member
Username: Kingtutus Lincoln,
Nebraska
U.s.a
Post Number: 110 Registered: Dec-07
Posted on
Thursday, January 24, 2008 - 20:50 GMT his us amps dose 1000wrms. he need like 1500wrms. the Q has the bp on it
Gold Member
Username: Nd4spd18 Northwest PA
Post Number: 5739 Registered: Jul-06
Posted on
Thursday, January 24, 2008 - 20:52 GMT No you don't NEED 1500w. Thats pushing it even with the BP. 1000w is what that sub is designed for........
Platinum Member
Username: Bestmankind RD 1000.1D with SI MAG...
Post Number: 17295 Registered: Oct-05
Posted on
Thursday, January 24, 2008 - 20:52 GMT ohhhhhh ok.
Silver Member
Username: Kingtutus Lincoln,
Nebraska
U.s.a
Post Number: 111 Registered: Dec-07
Posted on
Thursday, January 24, 2008 - 21:03 GMT the rating for the FI Q with BP is 1200wrms-1500wrms
Gold Member
Username: Nd4spd18 Northwest PA
Post Number: 5741 Registered: Jul-06
Posted on
Thursday, January 24, 2008 - 21:30 GMT So they say...... those subs have been known to have issues like tinsel slap, especially when powered over 1000w
Silver Member
Username: Kingtutus Lincoln,
Nebraska
U.s.a
Post Number: 112 Registered: Dec-07
Posted on
Thursday, January 24, 2008 - 21:36 GMT they have fixed it
Platinum Member
Username: Bestmankind RD 1000.1D with SI MAG...
Post Number: 17298 Registered: Oct-05
Posted on
Thursday, January 24, 2008 - 21:38 GMT i still say you are getting greedy with the power.
Gold Member
Username: Naledge503 Http://www.LowDownForu...
Post Number: 2833 Registered: Jun-06
Posted on
Thursday, January 24, 2008 - 23:06 GMT The XT-2000D only does 800 rms @ 1ohm
Gold Member
Username: Andrew571 Stillwater/Edmond,
Oklahoma
USA
Post Number: 1393 Registered: Oct-05
Posted on
Thursday, January 24, 2008 - 23:57 GMT Get yourself a T10001BD .... You can't go wrong with that nice of an amp plus all of them are usually birthsheeted around 1400+. I powered Qs with a T10001BD without the BP Option... I gave it 1526 watts @ 1ohm... The Q didnt sweat. I say throw 2k @ it. It wont hurt unless ur a complete idiot with it.
Gold Member
Username: Nd4spd18 Northwest PA
Post Number: 5751 Registered: Jul-06
Posted on
Friday, January 25, 2008 - 00:30 GMT " they have fixed it " right........ I'll believe that when we stop seeing subs with tinsel slap issues
Silver Member
Username: Marcooo Post Number: 267 Registered: Mar-07
Posted on
Friday, January 25, 2008 - 02:27 GMT 1500w rms on it daily used reasonably will be fine for it, BP option or not. That's the common consensus on SSA and I've got a Fi Q with BP. Only have ~900 on it atm, not for long though. BP option or not I'd be real careful giving it more than 1500w rms.
Silver Member
Username: Kingtutus Lincoln,
Nebraska
U.s.a
Post Number: 114 Registered: Dec-07
Posted on
Friday, January 25, 2008 - 04:07 GMT Quentin wonts to get saz-3000d for the 2 DD3518's. but he needs a different amp for his Q so y go buy two amps when i will be cheaper to get the one and set the gain down. then he don't have to get a another amp when he up grades
Gold Member
Username: Jkidder Gunshine ,
State
Flawda
Post Number: 3100 Registered: Nov-05
Posted on
Friday, January 25, 2008 - 04:13 GMT sx1250 is def. enough for it. perfect amp for it. thats an SQ amp and puts out 1300+
Silver Member
Username: Kingtutus Lincoln,
Nebraska
U.s.a
Post Number: 115 Registered: Dec-07
Posted on
Friday, January 25, 2008 - 04:17 GMT we cant get it to sound good, we even took it to a ex-kicker worker to set it. he didn't no how to set it so we called Chad lee and he help a little then we set it some more but the us amps was still louder.