|
Silver Member Username: Santa_fePost Number: 277 Registered: Jul-07 | how do i kno if my subs are clipping???and how do i fix it??? i have em tuned at the correct voltage but they were like bumping and like bumping wiht like a nasty sound like all the power couldnet get out...where should i set subsonic filter and frequencey |
|
Silver Member Username: B3n07Louisville, Ky USA Post Number: 403 Registered: Jul-07 | is your subs in a ported box if not then you should have subsonic turned off and are you using bass boost on your hu turn it off and set to flat also if you have bass boost and your sub shoule be good |
|
Gold Member Username: Nd4spd18Northwest PA Post Number: 3356 Registered: Jul-06 | Bass boost at the amp causes massive clipping, make sure that's off Set the subsonic filter to a few hz lower than the tuning of your box Some bass boost on the HU is ok, just don't push it at high volume. |
|
Gold Member Username: Tremor1127Fi Post Number: 2344 Registered: Aug-06 | if your subs sound weird at all, yeah, turn em down. that seriously KILLS subs... watch this video if you have anymore questions about clippage: http://www.break.com/index/cop-butchers-national-anthem.html |
|
Platinum Member Username: GlasswolfWisteria, Lane USA Post Number: 12049 Registered: Dec-03 | http://www.bcae1.com/2ltlpwr.htm read this understand clipping |
|
Silver Member Username: Santa_fePost Number: 278 Registered: Jul-07 | okay, i think i understand it all, i have my subs tuneed to 50 hz.......and 38.6 volts.....what should my frequence hertz be set and and what should my Lpf hertz be set to??? should these all be at 50hz?? |
|
Silver Member Username: Santa_fePost Number: 280 Registered: Jul-07 | bump |
|
Gold Member Username: Nd4spd18Northwest PA Post Number: 3361 Registered: Jul-06 | Set LPF to around 80-100 hz, whatever sounds best. Turn it up until the bass starts to sound like it's coming from the back of the car instead of all over. Then turn it down a little. |