Need mono amp for 3 kicker s12d have bout a 200-250 dollor budget

 

New member
Username: Chubby_boy

T.A.Z.

Post Number: 2
Registered: Oct-07
duz any1 knw da best mono amp amp to run 3 kicker s12dz on i have bout 200-250 i wana spend
 

Gold Member
Username: Juliob

Santo DomingoDominican Re...

Post Number: 4959
Registered: Dec-05
post subs specs, voice coil config please
 

New member
Username: Chubby_boy

T.A.Z.

Post Number: 3
Registered: Oct-07
diz iz wut i found on another post

Round 12" cast aluminum, heavy duty frame

60 oz. magnet weight

168 oz. magnet structure weight (10 lbs+)

Talc filled Copolymer cone

Santoprene Surround glued and stitched to cone body

2" , 4 Ohm heavy duty voice coil on space age Kapton former

Sleeved leads to prevent shorting

Perimeter spider vents for additional cooling and smoother performance

Extended pole for exceptional voice coil cooling

Heavy duty lead connectors (will accept 4 gauge wire)

Designed for small sealed enclosure - .88 cu.ft. recommended

Technical Specifications

600 watt maximum power handling capability

24-100 Hz Frequency Response

Fs =21.79 Hz (Free air resonance frequency of driver)

Qms=8.647 (Mechanical damping)

Qes=0.3870 (Electrical damping)

Qts=0.3704 (Total damping of woofer at Fs)

Vas=131.11 liters (Volume of air having the same acoustic compliance as the enclosure)

Cms=0.3261E-03 M/N (Suspension compliance)

Re=3.47 ohms (DC voice coil resistance)

BL=14.170 Newtons/Amp (Force factor)

Sd=0.053502 sq. mtrs (effective surface area of driver cone)

Mms=0.163589 Kilograms (Moving mass)

Hvc=1.170" (Voice coil winding height)


Hag=.500" (Air gap height)

Xmax=0.335 (Linear excursion, one direction, equals voice coil overhang)

Xlin p-p=.670 (Total linear excursion, peak to peak)

Ref Efficiency=0.3368%

Predicted Output=87.474 Db/1W/1M
 

Gold Member
Username: Naledge503

Http://com4.runboard.c...

Post Number: 2028
Registered: Jun-06
They are single 4 ohm. I can only find the max rating for them, which is 600 max, so basically cut that in half.

You are gonna want an amp that does 1000 watts rms at 1 ohm. Your final impedance will be 1.33

Check out this amp...Its a good deal.

http://www.caraudio.com/forum/showthread.php?t=263590
 

Gold Member
Username: Juliob

Santo DomingoDominican Re...

Post Number: 4969
Registered: Dec-05
for 250$ grab a power acoustik a 1800DB, that way you get the power you need for the budget
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us