Bronze Member Username: Joelrobichaud360
Bouctouche,
New-Brunswick
Post Number: 30
Registered: Apr-07
|
Posted on What would be the space requirement for a 12" sub inside the box ?? |
Gold Member Username: Ctmike
Ct.
Post Number: 5240
Registered: Feb-06
|
Posted on around 6cuft. |
Gold Member Username: Nd4spd18
Northwest PA
Post Number: 3260
Registered: Jul-06
|
Posted on It depends on the sub. But thats way to high ^^^^^
Most 12s should take around 3 cu.ft. |
Silver Member Username: Jtown
ATX,
Texas
Post Number: 441
Registered: Mar-07
|
Posted on but he means, inside the box. as in the sub is in the middle of the enclosure, you can't see it without some plexi...I'm assuming.... |
Platinum Member Username: Rovin
4 10 Pioneer...
Post Number: 12264
Registered: Jul-05
|
Posted on if he is asking whats the typical cuft which most 12" uses - then its about 2-2.5cuft after displacement...... |
Gold Member Username: Jkidder
Gunshine ,
State
Flawda
Post Number: 2087
Registered: Nov-05
|
Posted on .16 cu ft is he askin displacement? lol |
Gold Member Username: Nyyfan13
Fi SSD
USA
Post Number: 6304
Registered: Jul-06
|
Posted on i think ctmike was giving a dumb answer cause the OP asked such a dumb question.....just a thought
but joel, what sub is it? sealed or ported? |
Gold Member Username: Ctmike
Ct.
Post Number: 5251
Registered: Feb-06
|
Posted on correct^^. |
Bronze Member Username: Joelrobichaud360
Bouctouche,
New-Brunswick
Post Number: 31
Registered: Apr-07
|
Posted on sealed ..just whats a tipical box for a 12"???? |
Gold Member Username: Nyyfan13
Fi SSD
USA
Post Number: 6308
Registered: Jul-06
|
Posted on about 1cuft - 1.5cuft |
Gold Member Username: Nd4spd18
Northwest PA
Post Number: 3273
Registered: Jul-06
|
Posted on ^^^^ Thats about right |