ok on my amp the power wire fell out so i was tryin to put it back in but i noticed that the allen screw part is all stripped and now i cant get the power wire in my amp. idk what to use to get a stripped screw out anybody have any ideas.
Try using a little bit bigger of size, or use the same one and push down harder so it doesn't slip(assuming it still has a little big of shape left). Or maybe a screw extractor?
how would the spade connectors work wit my situation tho? the power wire is 2gauge and the allen screw to the 12volt on the amp is the one that is stripped so dont quite understand how the spade connectors would work
I'd say impact driver but it would probably depend on how your terminals are set up. You wouldn't want to knock it off. I'd do what JAYM3S said though. I've had to cut slots in the case screws on my dirtbikes many times and it works great.
if its a stripped allen head. put a few drops of super glue in the head, put the allen driver in there, let it set up for a minute, then back it out. Retap the hole to the next oversize and install a new screw.