Silver Member Username: MendonmafiaUSA Post Number: 371 Registered: Aug-06 | but if my amp is only stable to 2 ohms and i have a 1 ohm load can i use a 1 ohm resistor in the circuit to increase the resistance or will this have no effect. i plan on running 2 id8d4's in my rear shelf off of a 400 rms @2ohm amp but the dual 4 ohm coils only allow me to run at either 16, 4 or 1 ohm |
Silver Member Username: BigharvPost Number: 280 Registered: Jun-07 | don't take my word for it, but that should work. a subwoofer is pretty much like a giant resistor so as long as you wire it correctly i think that should work. oh and i got my RSD components in, still havent installed them yet, but they look nice |
Silver Member Username: MendonmafiaUSA Post Number: 372 Registered: Aug-06 | nice. Let me know how they sound. |
Gold Member Username: AdddisorderWest palm, Florida Post Number: 4936 Registered: Jan-06 | dont do that, it wont work right. the resistor will take half of the power that the amp puts out and dissapate it as heat. and more then likely will just over heat and blow. |
Silver Member Username: MendonmafiaUSA Post Number: 378 Registered: Aug-06 | yea im not gonna get thoes woofers. but im looking for two 8 inchers for about $150 max to fill out some midbass. i was thining the Jbl 8's but ive never heard em. |
Gold Member Username: JakeyplaysbassSt. Louis, MO Post Number: 1906 Registered: Jul-05 | http://www.edesignaudio.com/edv2/index.php?cPath=90 about halfway down the page... 9kv.2 dual 2s. its the forum pricing...ull get around 30-35%off. |
Bronze Member Username: Press1Yuba City, CA USA Post Number: 39 Registered: Nov-04 | Most resistors have watt ratings on them, if your amp exceeds the range of the resistor, it will overheat and blow like a fuse. |
Silver Member Username: MendonmafiaUSA Post Number: 383 Registered: Aug-06 | sweet deal jake, thanks. |
Gold Member Username: Nd4spd18Southeast PA Post Number: 3166 Registered: Jul-06 | Won't work. The resistor would take away half the power, defeating the purpose. |
Gold Member Username: Adam_sPost Number: 1829 Registered: Aug-04 | Once again big harv giving some newb advice. go figure. |