Whats that smell

Ben Bronze Member Username: B3n07 Louisville, Ky USA Post Number: 23 Registered: Jul-07	Posted on Tuesday, July 24, 2007 - 04:03 GMT ok i have a question for you all i have a profile AP 1200 bridged to power one Infinity Perfect Kapa 10 ok but if i play the sub for more than 30 min it shuts down or it will keep going and put out a real bad smell i checked all the connections and even did a wiring kit upgrade to 4 gauage power and 0 negative and its still smelling could someone help me out
Troy Jones Bronze Member Username: Tejcurrent Post Number: 88 Registered: Apr-07	Posted on Tuesday, July 24, 2007 - 11:47 GMT it's that sticky that burns so well... first thing that came to mind when reading the title. Where are your gains set, and what type of enclosure is it in? Have you tested your voltage at the amp with a DMM?
Troy Jones Bronze Member Username: Tejcurrent Post Number: 89 Registered: Apr-07	Posted on Tuesday, July 24, 2007 - 11:47 GMT what ohm load are you giving that amp?
Ben Bronze Member Username: B3n07 Louisville, Ky USA Post Number: 28 Registered: Jul-07	Posted on Wednesday, July 25, 2007 - 03:11 GMT the ohm load is 4 ohms the enclosure is a Q logic sealed but i will have to test voltage out havent done that yet
Jesse D. Gold Member Username: Naledge503 Http://com4.runboard.c... Post Number: 1413 Registered: Jun-06	Posted on Wednesday, July 25, 2007 - 03:25 GMT How high is the gain on the amp?
Ben Bronze Member Username: B3n07 Louisville, Ky USA Post Number: 30 Registered: Jul-07	Posted on Wednesday, July 25, 2007 - 03:53 GMT its half way
Ben Bronze Member Username: B3n07 Louisville, Ky USA Post Number: 37 Registered: Jul-07	Posted on Thursday, July 26, 2007 - 02:34 GMT well we think we figured out what the problem was the alternator is only pushing 90 amps and the fuse in the fuse holder was cracked going to fix these problems and see what i get
John Z Bronze Member Username: Tblazer74 South Salem, NY USA Post Number: 23 Registered: Jun-07	Posted on Thursday, July 26, 2007 - 03:15 GMT Voice Coils roasting over an open fire... Just kidding, hopefully. If it's a new set up, it could be excess glue burning off.
Ben Bronze Member Username: B3n07 Louisville, Ky USA Post Number: 42 Registered: Jul-07	Posted on Thursday, July 26, 2007 - 03:47 GMT ok well it only does this when the sub gets to be played 30minutes or more and then it starts to smell not stink
Troy Jones Silver Member Username: Tejcurrent Post Number: 108 Registered: Apr-07	Posted on Thursday, July 26, 2007 - 11:41 GMT any bass boost used?
Ben Bronze Member Username: B3n07 Louisville, Ky USA Post Number: 49 Registered: Jul-07	Posted on Thursday, July 26, 2007 - 18:43 GMT yea bass boost is in use why what could that be doing
Rich DiTieri Silver Member Username: Shorterthanrich Post Number: 101 Registered: Apr-06	Posted on Thursday, July 26, 2007 - 19:07 GMT turn off bass boost. its stupid.
Ben Bronze Member Username: B3n07 Louisville, Ky USA Post Number: 53 Registered: Jul-07	Posted on Thursday, July 26, 2007 - 19:14 GMT ok the base boost is on 50 and we also have the amp set to low pass filter is that suppose to be set that way
Rich DiTieri Silver Member Username: Shorterthanrich Post Number: 103 Registered: Apr-06	Posted on Friday, July 27, 2007 - 05:47 GMT can you change settings on the low pass filter? Don't use the bass boost at all. It just distorts and makes things nasty..
Troy Jones Silver Member Username: Tejcurrent Post Number: 109 Registered: Apr-07	Posted on Friday, July 27, 2007 - 11:43 GMT all bass boost does is clip the signal, turn it off completely and adjust your eq accordingly.

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us