|
Bronze Member Username: Hear_dat_bass08Novlety, Ohio United States Post Number: 28 Registered: Mar-07 | well im buying my sub tongiht and it going to be powered by a Hifonics Zeus 2 Channel 600x1 and 300x2 and i was wondering whats the difference between a Dual 2ohm sub and a Dual 4ohm sub cause the one im buying is a dual 2ohm sub. |
|
Silver Member Username: Dakangofkrunk16Post Number: 421 Registered: May-07 | It is how you load to the amp Dual 2 = 1ohm(PArellel) and 4 ohm(Series) stable Dual 4 = 2ohm(PArallel) and 8 ohm(Series) stable |
|
Bronze Member Username: LikeapumaWashington/Utah Post Number: 69 Registered: Aug-06 | You can run a dual 2 ohm sub at either 1 ohm or 4 ohms. So if your amp is 600X1 a 1 ohm, you're good, if it's 600X1 a 2 ohms you need a different sub configuration. -C |
|
Silver Member Username: Dakangofkrunk16Post Number: 422 Registered: May-07 | Dual 2ohm will be able to be loaded to that Amp...Bridged at 4 Ohms..The amp will show you how to bridge it, its easy |
|
Bronze Member Username: Hear_dat_bass08Novlety, Ohio United States Post Number: 29 Registered: Mar-07 | wow im still really confused but heres the sub im buying and its already wired in the box and i was just wondering would it hurt the sub. http://www.hifisoundconnection.com/Shop/Control/Product/fp/vpid/3143118/vpcsid/0 /SFV/30046/sret/1215182211621121419282223222283214231214287218221234291222239240 297242237236241236239234243244237234 |
|
Silver Member Username: Dakangofkrunk16Post Number: 423 Registered: May-07 | Johny that amp is 600x1 @ 4ohm Bridged.... So just wire it the the amp...The way it says for it to be bridged |
|
Bronze Member Username: LikeapumaWashington/Utah Post Number: 70 Registered: Aug-06 | Well now I'm confused. I don't see how the sub is wired on that link. If it's wired to 4 ohms, then like Anonymous says, hook it up and you're good. -C |