|
New member Username: LrraiderPost Number: 3 Registered: Dec-05 | I used subwoofertools.com to design my box. I need to know on which piece do I mount my sub. Here is the link http://www.subwoofertools.com/forum/ported-box.asp?Ew=33&Eh=18&Dia=9&Xmax=27&Vd= .19&NumW=1&Vb=3.5&Fb=28&Qts=&Vas=&Fs=&CE=3 |
|
Bronze Member Username: Slimdog53185Bowling Green, Kentucky U.S. Post Number: 26 Registered: May-07 | You should be able to use any side except the one the port is on. As long as you have enough space to mount the sub and leave some room behind it. |
|
Platinum Member Username: Rovin2 10 Pioneer... Post Number: 11569 Registered: Jul-05 | the red part is the front of the box - however if its a hatchback or suv u can mount the sub on the top of the box port firing backwards to the trunk .... |
|
New member Username: LrraiderPost Number: 4 Registered: Dec-05 | ok thanks for your help |
|
Gold Member Username: JakeyplaysbassSt. Louis, MO Post Number: 1740 Registered: Jul-05 | just to let you know, when making a zigzag port like that your box volume almost cuts in half. that went from 3.5cuft down to almost 2cuft just because of port displacement. you might want to tune higher, lower your port area, or make a bigger box. i dont know what sub your using but if you origionally wanted around 3.5cuft your not getting anywhere near it. |