Bronze Member Username: TornPost Number: 70 Registered: Jan-07 | what amp should i get to make this sub hella thump? older 15" 4ohm dvc sub 600 rms 3500 series, all specs are the same except the newer one is 1200 rms, what ohms is safe to run this to a amp?. http://www.ddaudio.com/dd/caraudio/woofers.asp?series=3500d my budget is $400; and any quotes on a custom box to made by someone here? |
Silver Member Username: JkidderSpring hill, Florida Usa Post Number: 581 Registered: Nov-05 | ed nine.1 run it at 2 ohm |
Gold Member Username: Th3pwn3rPost Number:... Post Number: 2639 Registered: Jul-06 | Make sure to clean up that wiring or put some electric tape before any problems occur. |
Silver Member Username: DenimWww.TeamSSAudio.com, MD Post Number: 249 Registered: Nov-06 | Find a used PG Xenon 600.1. Would be a perfect match. |
Gold Member Username: AdddisorderWest palm, Florida Post Number: 4370 Registered: Jan-06 | that looks like a C motor i had a 3512c and ran 1.3k in it daily and it took it fine. i would go ahead and find an amp that does 1-1.2k DD really underrates their subs anyway so it should take the power fine, just feed it a clean signal |
Silver Member Username: JkidderSpring hill, Florida Usa Post Number: 584 Registered: Nov-05 | it would beg for more power with that pg man. go with an ed nine or zx1000. can easily take either of those.! |
Silver Member Username: LowdoseCahokia, IL. USA Post Number: 158 Registered: Apr-05 | "that looks like a C motor i had a 3512c and ran 1.3k in it daily and it took it fine. i would go ahead and find an amp that does 1-1.2k DD really underrates their subs anyway so it should take the power fine, just feed it a clean signal" Same here. |