Bronze Member Username: DlocWHITTIER, CA USA Post Number: 97 Registered: Jul-06 | i have 4 15 cvr kickers.they are in a sealed box.i have a 2000 watt monoblock. how should they be wired??? |
Silver Member Username: Joebruce15 Inch Wang... Post Number: 676 Registered: May-04 | Whats the voice coil on the subs? And whats the ohm load the amp is stable to? What amp is it? |
Silver Member Username: Dakangofkrunk16PLANET EARTH, FLA Post Number: 780 Registered: Mar-07 | 2000WATT MONOBLOCK AMP PERFORMANCE TEKNIQUE also those caps u have aren't doin much but draining ur bat get red of em and get a H/O alt and do big 3 ur prolly gonna get voltage drops |
Bronze Member Username: DlocWHITTIER, CA USA Post Number: 98 Registered: Jul-06 | they are dual 4ohm voice coil....1 ohm stable @900wrms |
Silver Member Username: Joebruce15 Inch Wang... Post Number: 685 Registered: May-04 | 2 or 8 ohm load http://www.rockfordfosgate.com/rftech/woofer_wizard.asp?submitted=true&woofer_qt y=4&woofer_imp=4 |
Bronze Member Username: DlocWHITTIER, CA USA Post Number: 99 Registered: Jul-06 | it would be better if i do it 2 ohms huh... |
Silver Member Username: Joebruce15 Inch Wang... Post Number: 688 Registered: May-04 | Yea but it problly wont be enough watts for your subs,whats the rms? and what does your amp do at 2ohms? Maybe just use 2 of your subs untill you can get a bigger amp. |
Bronze Member Username: DlocWHITTIER, CA USA Post Number: 100 Registered: Jul-06 | it does 2000watt max and 700 WRMS @2ohms |
Silver Member Username: Joebruce15 Inch Wang... Post Number: 689 Registered: May-04 | it will never do 2000,max numbers dont mean anything. If you do that then your subs will only be getting 175wrms, and thats if your amp puts out its stated power. I would just use 2 of your subs in a ported box at 1ohm then they will be gettin 450 each. Save up and get another amp that will do about 1600-2000 wrms at 1ohm then use all 4. |
Silver Member Username: Loc_outSanta Ana, Ca Resonant Eng... Post Number: 816 Registered: Feb-05 | What kind of amp is it? Do you already have it or plan on buying it? Like twiztid said save up and get an amp that does 2000rms not 2000max. When looking at amps, sub or speaker alway look at the RMS not the peak or max. |
Silver Member Username: DlocWHITTIER, CA USA Post Number: 101 Registered: Jul-06 | it bumps loud as f%^k nothing would happen to my subs or amp if i leave em like that would it??? |
Silver Member Username: Joebruce15 Inch Wang... Post Number: 691 Registered: May-04 | Leave em like what? So you already have them hooked up? How are they wired now? |
Silver Member Username: DlocWHITTIER, CA USA Post Number: 102 Registered: Jul-06 | I HAVE 2 WIRED DOWN TO 1 OHM AND TWO DOWN TO 2OHMS...THATS WHY IM TRYING TO SEE WHICH IS BETTER I BARELY OPEN THEM UP TODAY THEY BUMP LIKE THAT BUT TWO MOVE MORE THAN THE OTHER TWO SO THE ONES WIRED AT 1 OHM MOVE MORE THAN THE ONES THAT ARE WIRED TO 1 OHMS |
Silver Member Username: Joebruce15 Inch Wang... Post Number: 692 Registered: May-04 | Well first off you cant wire 2 dual 4ohm subs to 2ohms. So you have all 4 hooked up to the same amp? Youve got them all wired wrong if 2 are wired one way and the other 2 are wired a different way. The only way to wire all 4 of your subs to your amp is to a 2ohm or 8ohm load. |
Silver Member Username: DlocWHITTIER, CA USA Post Number: 105 Registered: Jul-06 | so im goimg to put them to a 2ohm load would that mess up my amp or subs |
Silver Member Username: Joebruce15 Inch Wang... Post Number: 694 Registered: May-04 | Nope they way you have em now would mess your stuff up. Wire them like in that link i posted and youll be good. But i still think you should just use 2 of your subs for now. |
Silver Member Username: DlocWHITTIER, CA USA Post Number: 106 Registered: Jul-06 | im going to put them down to 2ohms for now thanks for ur advice.... |
Silver Member Username: DlocWHITTIER, CA USA Post Number: 107 Registered: Jul-06 | would the kickers bump the same if the magnet is facing out??? |