|
Silver Member Username: QuigPittsburgh, Pa Us Post Number: 315 Registered: Sep-05 | im buying 1 15" kicker gonna PG octane r 15:0:1, im looking for a vented enclouse specs, if anyone could help me out that would be great, looking for SPL more then quality. |
|
Gold Member Username: 420alldaylongPost Number: 1470 Registered: Sep-06 | This is from Kicker website for a CVX 15" 5cf.+ displacement 3"x15.5" 22"long |
|
Silver Member Username: QuigPittsburgh, Pa Us Post Number: 316 Registered: Sep-05 | that first number, is that 3 inches wide, is that the vent size? |
|
Silver Member Username: QuigPittsburgh, Pa Us Post Number: 317 Registered: Sep-05 | ok i think i got the size i want, will b 16"x33"x20" that would equal 4.89 CUFT, now how would i do the vent, it would that change the CUFT at all, and im looking to tune it to around 31 hz i think. |
|
Gold Member Username: Extrmndor3IF U HEAR ME... crazydbs.com Post Number: 4602 Registered: Feb-06 | that amp kick @ss |
|
Silver Member Username: QuigPittsburgh, Pa Us Post Number: 321 Registered: Sep-05 | is it really? i got it for 150$ |
|
Silver Member Username: QuigPittsburgh, Pa Us Post Number: 323 Registered: Sep-05 | Any help guys? |
|
Gold Member Username: CenusHicksville, Ohio Post Number: 3122 Registered: Jan-05 | http://www.bcae1.com/spboxnew2.htm this might help, also i'd go with areo ports much easier to work with. |
|
Silver Member Username: QuigPittsburgh, Pa Us Post Number: 324 Registered: Sep-05 | wat are aero ports? how are they put in |
|
Gold Member Username: CenusHicksville, Ohio Post Number: 3128 Registered: Jan-05 | there pretty much pvc pipe but are flared at the end, you just cut a hole the size of pipe, i'd recomend atleast 4inch, then just cut it to length depending on what you want to tune of the box to be. |
|
Silver Member Username: QuigPittsburgh, Pa Us Post Number: 334 Registered: Sep-05 | ok, so heres the vented box i was looking at... http://www.subwoofertools.com/forum/ported-box.asp?Ew=33&Eh=16&Dia=9&Xmax=18&Vd= .12&NumW=1&Vb=2.9&Fb=35&Qts=&Vas=&Fs=&CE=0 for aero port, it would sound the same as a vent? what would the specs have to be and where would i have to put the sub, and the hole for the port, can i still keep the same size box? and how big will i have to have the pvc pipe, and what diamater....thanks |