hey guys!! i've just open an audio shop!! i wonder if you guys can show me the bypass codes for all of the brands!! (etc. Clarion, Alpine, Pioneer) so we don't have to do the switch!! i already knew the code for Dual, Jensen!! thanks much if you guys can help me out!!! take care!
will this work without a ground connected at all or does it need to be atleast hooked up to the parking brake because mine is not connected at all and does not work at all please let me know asap
i was wondering if anybody know,s which wire,s i,m supposed to hook up on the brain of my kvt-717 to get it opperational and if i have to hook up a brake ground how do i bypass it
Are all the codes for the Dual brand the same? Apparently every can't come to a consensus on how to permanently unlock a Dual brand player. I have seen everyone talk about an 8181, but does anyone if the 26604 code works for a XDVD8183? I just got one and need a sure fire way to crack it open...
HELPPPP!!!! I have a Dual 8181 and i tried to ground the parking brake wire to a screw and to the ground coming from the back of the unit... it worked both ways, but as soon as i put the car in gear the light say the parking brake is up stays on and starts beeping.... What am i doing wrong?
Guys, My XDVD 700 that I just installed, has a flicker in the screen,,, I am assuming that this is a defectr? Could it be a lack or good enough ground?
1. Go into AM/FM mode 2. Hit "setup" on the remote control 3. Enter 543210 on the remote, listening for the beep for each number entered 4. A new menu will appear. Touch the button that has the hammer/screwdriver on it in the upper left-hand part of the screen. 5. Select Brake bypass to "ON" and hit the "X" near the bottom of the screen.
The code is a permanent way of disabling the brake override on the Jensen units.
How to by-pass video on Jensen in dash dvd units
First Insert the DVD
After the disc loads and plays you will see a blue screen telling you "it is unlawful to view video while driving"
1)Activate the brake sequence and disable the blue screen using the hand brake, the switch method or anything else to give the unit its three pulses to disable that blue screen.
2) Next, on the main remote press stop twice, then 1, 2, 6, 4.
You will now see a hidden menu that says:
Region Code Brake Override Macrovision (Watch all the burned and pirated movies you want if this option is off) Loader Version Model Version
3) Using the right joystick on the unit, navigate to the options of your choice, click on them to toggle on, off or which region code you want.
This is what you want:
Region Code: 1 Brake Override ON Macrovision: OFF
When your done, click SYS SETUP on the main remote TWICE to save the settings and that's it your done!
The other way of doing this is by not engaging the parking brake sequence, so you're inputting the code with out seeing it this is the moron way to do it because you cant see the options but the same instructions apply
Please use caution this code is being sold for store displays or show use only not responsible for misuse or use while driving . check local laws before bypassing parking brakes Jensen 9312 by pass code! The parking brake bypass procedure is as follows:
1: Go into AM/FM mode 2: Hit "setup" on the remote control 3: Enter 543210 on the remote, listening for the beep for each number entered 4: A new menu will appear. Touch the button that has the hammer/screwdriver on it in the upper left-hand part of the screen. 5: Select Brake bypass to "ON" and hit the "X" near the bottom of the screen. 6: Use the unit wisely and above all safely. A ticket is one thing, causing a fatal accident due to negligence is another.
earlier jensen post should work with the following jensen models VM9311, VM9512, VM9412, VM9411, VM9312, VM9511TS, VM9021TS and VM9022 and the phase linear UV8 and UV7 models
Posted by dawit derege i have a dual xdvd 8181 and i can't seem to bypass the parking break. can anyone walk me through how to ground the ebrake wire?
Video bypass for dual in dash 8181
STEP ONE. Ground the E-Brake wire. No matter which method you use, you must ground the brake detection wire. I suggest you tap it into the ground wire on your wiring harness (ensures a good ground).
FACTORY RESET METHOD (not permanent)
1 Go to the Menu 2 Get to the Settings Menu 3 Select <yes> to Reset to Factory Settings.
Have recently heard complaints of this method not being permanent, as this is needed whenever they want to watch a DVD. Also, radio and screen angle presets are lost.
METHOD 2 AUDIO CD METHOD (Permanent) 1 Insert Audio CD 2 Press PLAY 3 Press STOP twice on remote 4 Enter 26604 on remote 5 Press ENTER 6 Take out Audio CD and Insert a DVD ---------------- METHOD 3 DVD METHOD (Permanent) ** Insert a DVD ** Let it play until you hear sound ** Press STOP twice on remote ** Enter 26604 ** Press ENTER
The blue warning screen should immediately go away after pressing the last digit of "26604." Still press ENTER as a precaution.
The 3rd method seems to work with most of the duals
This info is only to be used off road/ display or show use don't be stupid and drive while watching a dvd
Please I really need some help me in this question, ...Will someone tell me the VIDEO LOCK BYPASS SWITCH CODE for my PHASE LINEAR UV8020 and how to do it......I see all the codes in this post related to other versions, but I need one for mine, I will really appreciate your help.......
I have a Dual XDVD8130 and Im trying to bypass the parking brake switch for watching DVD's.. I understand the 26604 sequence, but my remote doesnt have a "enter" button... What button do i press then?
Phase Linear UV8020 bypass is very easy. When you are wiring it up, just twist the pink parking brake wire with the black ground wire and hook it into your wiring harness, that's it. You ground out the parking brake wire which tricks the unit into thinking that the parking brake is always on. No codes work that I have found and this is way easier and works perfect.
you want the code for all units?? GROUND THE PINK WIRE OUT!!!! THE PARK BRAKE SWITCH IS A GROUND< SO JUST HOOK IT TOO A GROUND. no need for a switch, or bypass code. lol
I'm trying the easiest way possible. I had best buy install so if I unhook the e brake wire then they will hit me with the (we didn't do this so your warranty is not any good now)B.S. But anyway that's y I'm looking for just a bypass code. Thank for the response