|
Bronze Member Username: Jesse59672OK Post Number: 35 Registered: Feb-07 | how do i accomplish a kill switch for an amplifier. is it actually done on the rca's or the power cable elaborate for me. |
|
Gold Member Username: Wolfman1966WEST MONROE , LOUISIANA USA Post Number: 1915 Registered: Jan-06 | I did mine on the remote wire. wire from fuse to one side of switch, wire out of other side of switch to amp. worked great. |
|
Silver Member Username: Nd4spd18Southeast PA Post Number: 538 Registered: Jul-06 | ^^^^^ Yep. Put an inline switch in the remote wire. |
|
Bronze Member Username: Jesse59672OK Post Number: 36 Registered: Feb-07 | where can i find a switch like that. lol. |
|
Silver Member Username: Nd4spd18Southeast PA Post Number: 541 Registered: Jul-06 | Right here: _ON-OFF_.html,http://www.allelectronics.com/cgi-bin/item/LRS-134/700225/12VDC_(1 8V)_LIGHTED_ROCKER_SWITCH,_ON-OFF_.html |
|
Gold Member Username: Wolfman1966WEST MONROE , LOUISIANA USA Post Number: 1916 Registered: Jan-06 | yeah, u definately want the lighted one, that way you can tell when its on and off and won't accidentaly leave it on and run down your battery. |
|
Gold Member Username: Van_manBoston South, MA Post Number: 2069 Registered: Mar-06 | FYI, Lighted switches can cause loss of votage to amps rem terminal. Well at least it did when I ran 4 of em...Went with indicating type as seen in My USB Vid clip.. |
|
Silver Member Username: Nd4spd18Southeast PA Post Number: 551 Registered: Jul-06 | That should not happen if you use a good 12 volt power source, not the HUs remote wire. If your using the remote wire then you don't want the lighted switch, because you don't want to be powering it the the HU's remote circuit. It is easy to burn out that circuit by drawing too much current from it. |
|
Silver Member Username: Nd4spd18Southeast PA Post Number: 552 Registered: Jul-06 | didn't bump |
|
Gold Member Username: OglejustYou aint bangin unless..., Il Post Number: 1121 Registered: Aug-06 | just hook the switch to the rem wire and dont get a lighted 1... that way when the car is off the amp is off however if ur driving and u dont want the sub on u can flip the switch. |