|
Silver Member Username: PitbullguyChicago, Illinois I Eats Beats... Post Number: 737 Registered: Oct-06 | Based on the advice of Mr. Logan, i'm looking at ordering these 3 pieces of equipment from knuconceptz: http://www.knukonceptz.com/productDetail.cfm?prodID=KLM-AK0 http://www.knukonceptz.com/productDetail.cfm?prodID=BC-1024 http://www.knukonceptz.com/productDetail.cfm?prodID=KNF-12 For the amp kit i have to choose the fuse type, and for the 2-way distribution system, i have to choose 2 fuse types. Which ones do i want? These products are going to be used with a kicker kx250.2 powering some MB quart components, and an EDnine.1 powering 2 12" arsenals. Lemme know if you need more specs to figure out which fuses i need. Thanks in advance! |
|
Gold Member Username: SouthernrebelMonroe, Louisiana DD 9515d~~]... Post Number: 4367 Registered: Mar-04 | You dont need all 3 of those...you will only need 2 of them. (You can run 2 4ga ground wires and you will be good) I would get these 2: http://www.knukonceptz.com/productDetail.cfm?prodID=KLM-AK0 w/ 200A fuse http://www.knukonceptz.com/productDetail.cfm?prodID=KNF-12 w/ 150A and 40A fuses Also, you will need a few feet 4ga wire for the nine.1 and prolly 8ga for the 250.2. |
|
Silver Member Username: PitbullguyChicago, Illinois I Eats Beats... Post Number: 738 Registered: Oct-06 | can i get that extra wiring of knuconceptz? i assume i can. |
|
Silver Member Username: PitbullguyChicago, Illinois I Eats Beats... Post Number: 739 Registered: Oct-06 | bump |
|
Silver Member Username: PitbullguyChicago, Illinois I Eats Beats... Post Number: 740 Registered: Oct-06 | Anyone else have knowledge on this subject...are those the two pieces of equipment i need? and with those fuses canaan reccomended? |
|
Gold Member Username: SouthernrebelMonroe, Louisiana DD 9515d~~]... Post Number: 4376 Registered: Mar-04 | Yes...you can get Knuconceptz KLM wire by the foot. http://www.knukonceptz.com/productMaster.cfm?category=KLM%20Kable# Run 4ga from the distro-block to the amps. |
|
Gold Member Username: SouthernrebelMonroe, Louisiana DD 9515d~~]... Post Number: 4377 Registered: Mar-04 | You will also need some RCA cables...i would get these: http://www.knukonceptz.com/productMaster.cfm?category=Krystal%20RCA%20Kables or http://www.knukonceptz.com/productMaster.cfm?category=Karma%20RCA%20Kables The 4M or 6M should be what you need, depending on the length of your vehicle. |
|
Gold Member Username: AdddisorderWest palm, Florida Post Number: 3152 Registered: Jan-06 | just get the 250a fuse for the amp kit incase you ever upgrade. that cable can carry 250 no prob. and the fuse is to protect the cable not the amps so... |
|
Silver Member Username: PitbullguyChicago, Illinois I Eats Beats... Post Number: 751 Registered: Oct-06 | cool mat, whachya think about the 2way distrib system fuses...150A and 40A like canaan said? http://www.knukonceptz.com/productDetail.cfm?prodID=KNF-12 |
|
Gold Member Username: AdddisorderWest palm, Florida Post Number: 3157 Registered: Jan-06 | http://www.knukonceptz.com/productDetail.cfm?prodID=BC-1024 for distro i would get this ^^ its what i got, really i dont see much point in fusing the little runs of wire like that. your nine.1 and kicker amp arnt going to pull that much current to burn up 1-2 ft. of 4g wire and like cannan said just run 2 4g grounds |
|
Gold Member Username: AdddisorderWest palm, Florida Post Number: 3158 Registered: Jan-06 | also im like 99% positive both amps you mentioned are internally fused so thats another reason why you wouldnt need the fused distro. |
|
Silver Member Username: PitbullguyChicago, Illinois I Eats Beats... Post Number: 754 Registered: Oct-06 | omg i'm starting to think Logan works for Knuconceptz, he told me i need like 37 different pieces of equipment. |
|
Gold Member Username: AdddisorderWest palm, Florida Post Number: 3160 Registered: Jan-06 | hahaha thats funny |