What tuning for RE SX 15?

Steven Norris Gold Member Username: Stnorris Davenport, IA US Post Number: 1978 Registered: Apr-06	Posted on Tuesday, January 30, 2007 - 02:10 GMT Ive been runnin a 40hz port with 50sq. in. of port area and i ran a 35hz port with 40sq. in. port area before that rattled the door panels alot. So i was wanted to know what do u think my next port should be to be a "street beater" - the tuning and port area. I was thinkin like 28? with more port area? what does anyone else think? Car is 03 oldsmobile alero. Box around 3.7 cubes.
Polo Gold Member Username: Safe_cracker Chicago, IL US Post Number: 2388 Registered: Jan-06	Posted on Tuesday, January 30, 2007 - 02:49 GMT 4.5 cf, net, tuned to 38-41hz with 96sqin of port should do. Polo..
Steven Norris Gold Member Username: Stnorris Davenport, IA US Post Number: 1981 Registered: Apr-06	Posted on Tuesday, January 30, 2007 - 04:22 GMT how do u think that much port area would compare to the current 50sq. in. i had? and what about this box 3.5 cuft net, 38-41hz with 96in port area.
Mr. Ogle Silver Member Username: Oglejust 15 Inch Wanger Club Pr..., Il Post Number: 762 Registered: Aug-06	Posted on Tuesday, January 30, 2007 - 04:26 GMT so im thinkin the same thing... i was thinkin 3.5 cubes 28hz.. but dont no how much port area to have.
Reece Brassler Gold Member Username: Denali_on_22s SSX, Tenneki US of A Post Number: 1060 Registered: Feb-06	Posted on Tuesday, January 30, 2007 - 05:58 GMT I'd tune it around 32 hz. Picks up the best of the highs and the lows. Most of those subs pick up much lower frequencys then you tune them to. You can maintain good SQ tuned into the low to mid 30s.
Mr. Rob Gold Member Username: Extrmndor3 Sit and Look pretty Post Number: 3497 Registered: Feb-06	Posted on Tuesday, January 30, 2007 - 06:53 GMT try aorund 4 cb and tuned it to 35 hz bigger boxes are for lows smaller are for highs
Steven Norris Gold Member Username: Stnorris Davenport, IA US Post Number: 1983 Registered: Apr-06	Posted on Wednesday, January 31, 2007 - 01:41 GMT what does anyone think about 32hz, 3.8 cubes, 65 sq.in port area for a street beater and 40hz, 3.3 cubes, 70 sq. in. port area for spl?
Reece Brassler Gold Member Username: Denali_on_22s SSX, Tenneki US of A Post Number: 1095 Registered: Feb-06	Posted on Wednesday, January 31, 2007 - 01:47 GMT BIGGER. ^^^
Steven Norris Gold Member Username: Stnorris Davenport, IA US Post Number: 1984 Registered: Apr-06	Posted on Wednesday, January 31, 2007 - 01:48 GMT for both of them? i dont have room for bigger, its an interchangeable slot port box thats already built

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us