Silver Member
Username: Alexv305 Tavernier,
FL
USA
Post Number: 584 Registered: Oct-05
Posted on
Sunday, January 28, 2007 - 04:40 GMT I am selling my car so I put the factory radio back in. The car doesnt have an onboard amplifier or anything like that. I used a harness on the speakers so I didnt cut anything. The problem is, only one speaker works after I re-installed the factory radio. All four worked at first, then when I pushed the radio into place, I noticed about 20 minutes later only one speaker was working. The other speakers make like a scratchy noise at times. The speakers are not blown. I dont know whats going on. Anyone got an idea to resolve this?
Gold Member
Username: Extrmndor3 Sit and
Look pretty
Post Number: 3445 Registered: Feb-06
Posted on
Sunday, January 28, 2007 - 04:46 GMT u replaced the stock speakers too??? maybe the harness of the speaker its lose or someting
Gold Member
Username: James1115 Use a simple...
Post Number: 8945 Registered: Dec-04
Posted on
Sunday, January 28, 2007 - 04:47 GMT sounds like a bad connection, try to pull out the factory plug and clean it up and plug it back in. Make sure nothing got into the radio like lint or something in the plug also.
Gold Member
Username: Extrmndor3 Sit and
Look pretty
Post Number: 3447 Registered: Feb-06
Posted on
Sunday, January 28, 2007 - 04:52 GMT james you sold your avalanches right??? how did they sounded????
Silver Member
Username: Alexv305 Tavernier,
FL
USA
Post Number: 585 Registered: Oct-05
Posted on
Sunday, January 28, 2007 - 04:54 GMT i checkec all the conecctions and same problem. weird is that it worked at first..
Gold Member
Username: James1115 Use a simple...
Post Number: 8948 Registered: Dec-04
Posted on
Sunday, January 28, 2007 - 04:54 GMT yes I did and I kick myself every day for it. It sounded fantastic
Silver Member
Username: Alexv305 Tavernier,
FL
USA
Post Number: 587 Registered: Oct-05
Posted on
Sunday, January 28, 2007 - 04:55 GMT aftermarket speakers, not factory
Gold Member
Username: James1115 Use a simple...
Post Number: 8949 Registered: Dec-04
Posted on
Sunday, January 28, 2007 - 04:55 GMT bad factory HU amp
Gold Member
Username: James1115 Use a simple...
Post Number: 8950 Registered: Dec-04
Posted on
Sunday, January 28, 2007 - 04:56 GMT are they 4 ohm?
Silver Member
Username: Alexv305 Tavernier,
FL
USA
Post Number: 588 Registered: Oct-05
Posted on
Sunday, January 28, 2007 - 04:57 GMT yes 4 ohm
Gold Member
Username: Extrmndor3 Sit and
Look pretty
Post Number: 3448 Registered: Feb-06
Posted on
Sunday, January 28, 2007 - 04:59 GMT why did you sold them???
Gold Member
Username: Blainew Alpine type S 6.5 inch...
Post Number: 2143 Registered: Nov-05
Posted on
Sunday, January 28, 2007 - 05:00 GMT try the old HU again.... just wire it up and see if the speakers work then....if so ... ur stock HU is messed
Gold Member
Username: James1115 Use a simple...
Post Number: 8953 Registered: Dec-04
Posted on
Sunday, January 28, 2007 - 05:00 GMT because I sold my Jeep and my new truck had no room for a box that big so I thought
Gold Member
Username: James1115 Use a simple...
Post Number: 8954 Registered: Dec-04
Posted on
Sunday, January 28, 2007 - 05:01 GMT sounds like a bad HU Alex, look on ebay for a new one, stock HU's are cheap to replace. What type of car is it?
Gold Member
Username: Extrmndor3 Sit and
Look pretty
Post Number: 3450 Registered: Feb-06
Posted on
Sunday, January 28, 2007 - 05:05 GMT ur a bad boii.\ for sellin it.