How do i wire this amp to 1 ohm, and 2 ohms?

L.A. New member Username: Mikelarry375 Madison , Wisconsin U.S.A Post Number: 5 Registered: Jan-07	Posted on Monday, January 15, 2007 - 00:26 GMT I just bought a Kenwood KAC-9152D Mono Block amp. How do i wire it to 2 ohms, and cane i run the subs at 1 ohm cause i heard it can run 1750X1 @ 1 ohm. Is it true if it is can you help me wire it? Amp Specs Amplifier Type: Mono RMS Power: 500W x 1 @ 4 ohms THD at 4-Ohm RMS Power: 0.08% RMS Power: 900W x 1 @ 2 ohms Speaker Level Inputs: Yes Preamp Outputs: Yes Built-In Crossovers: LP Bass Boost: 0 - 18 dB Frequency Response: 5-200 Hz Signal to Noise Ratio: 100 dB Fuse Rating: n/a Subwoofers Specs Peak 1800 W RMS 700 Dual 2 ohm voice coils
the_kid Silver Member Username: Rosrock2000 FI SSD 12 , MI USA Post Number: 110 Registered: Dec-06	Posted on Monday, January 15, 2007 - 00:32 GMT what are the voice coil configs on subs.. dual 2 dual 4.. single 4?
the_kid Silver Member Username: Rosrock2000 FI SSD 12 , MI USA Post Number: 111 Registered: Dec-06	Posted on Monday, January 15, 2007 - 00:32 GMT o and by the way.. that amp will prolly do ore like 800 rms not 900
the_kid Silver Member Username: Rosrock2000 FI SSD 12 , MI USA Post Number: 112 Registered: Dec-06	Posted on Monday, January 15, 2007 - 00:34 GMT someone lied to you when they clamed you could run 1750 at 1 ohm..
L.A. New member Username: Mikelarry375 Madison , Wisconsin U.S.A Post Number: 7 Registered: Jan-07	Posted on Monday, January 15, 2007 - 00:35 GMT Yeh i read it in a forum. It says it's 1 ohm stable but idk. They are Dual 2 ohm voice coils.
Yanks Fan Gold Member Username: Nyyfan13 Fi SSD USA Post Number: 2482 Registered: Jul-06	Posted on Monday, January 15, 2007 - 00:38 GMT http://www.salectronics.com/detail.asp?product_id=kac9102DRB&referer=googleads&g clid=CMzu34uW4YkCFTcrFQodrwycLA it says it does 1700 MAX, not rms...it does 850 at 1 ohm according to this page... and for wiring, here: http://www.the12volt.com/caraudio/woofer_configurations.asp
L.A. New member Username: Mikelarry375 Madison , Wisconsin U.S.A Post Number: 8 Registered: Jan-07	Posted on Monday, January 15, 2007 - 00:40 GMT No thats not right at all. Thats bs. LOl you got the wrong amp it's not a 9102D it's a 9152D.
Yanks Fan Gold Member Username: Nyyfan13 Fi SSD USA Post Number: 2483 Registered: Jul-06	Posted on Monday, January 15, 2007 - 00:42 GMT f_ck...my bad man. i didnt even check the title after i found it...my bad
L.A. New member Username: Mikelarry375 Madison , Wisconsin U.S.A Post Number: 9 Registered: Jan-07	Posted on Monday, January 15, 2007 - 00:45 GMT It's cool... Oh yeh and when if your gonna help me with wiring i need step by step instrucion or a pic. Im not good with reading, and learning. Im a visual learner. Thx much man
Ice T. Meyers Silver Member Username: Tdawg30 Ohio USA Post Number: 894 Registered: Jun-06	Posted on Monday, January 15, 2007 - 00:47 GMT they are essentially the same amps, the 9152 producing 50 more watts at 2ohms than the 9102 and 9152 able to be run down to one ohm, if at all.
Yanks Fan Gold Member Username: Nyyfan13 Fi SSD USA Post Number: 2485 Registered: Jul-06	Posted on Monday, January 15, 2007 - 00:47 GMT haha i understand man 1 dual 2 ohm sub wired to 1 ohm:

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us