Silver Member Username: Mr_keboAlbertville, Al USA Post Number: 906 Registered: Nov-04 | 2 of them. what size enclosure/tuning/port area. Goin in an expedition with the max of 24 height 48 width and 35 depth. Sub up port back? |
Bronze Member Username: Fi_car_audioHades, NV Post Number: 77 Registered: Sep-06 | Plenty of space there Subs up ports back... looking like 24"H X 48"W X 30.5"D . Port along the bottom 5" X 46.5" X 19" long. Nets you 14 cuft tuned to 33Hz with approx 230sqin of port. I am assuming that 35" doesnt quite get you to the back of the hatch... if it does, then Id have to change things a little. This will load off the hatch and drop the tuning a little lower than 33Hz as well. Have a happy new year... |
Silver Member Username: Mr_keboAlbertville, Al USA Post Number: 910 Registered: Nov-04 | 42 deep is the max i can go and when i do this is how far it comes http://img505.imageshack.us/img505/9800/pa160002vg7.jpg I wanna keep it away from the back hatch a bit so i have some places for my batts :D |
Gold Member Username: J_baby15Kentucky Post Number: 1108 Registered: Feb-06 | thats a nice box^^^ i like... |
Silver Member Username: Mr_keboAlbertville, Al USA Post Number: 911 Registered: Nov-04 | would 150 sq in of port be enough? |
Silver Member Username: Mr_keboAlbertville, Al USA Post Number: 912 Registered: Nov-04 | i really stink at box planning lol. what parts should i double baffle? I was gonna do the top and use some steel rods to brace |
Silver Member Username: Mr_keboAlbertville, Al USA Post Number: 913 Registered: Nov-04 | Scott if i build the box like you said the subs will be on the top but where should i place them in the center, at the back, the front where would be the best place? |
Silver Member Username: Mr_keboAlbertville, Al USA Post Number: 914 Registered: Nov-04 | TOP x2 48x30.5 LS x1 30.5x22.5 RS x1 30.5x22.5 FT x1 46.5x17.5 BC x1 46.5x22.5 pt x1 46.5X19 does that cut list look right to build the box that scott suggested? |