|
New member Username: StixtyMtl, Qbc Canada Post Number: 1 Registered: Dec-06 | HELLO I AI NEED HELP TO INSTALL MY SONY CDX 4050 IN MA TAURUS L 1991 FAMILY. the PROBLEM It IS THAT ALL the WIRE ARE TO CROSS AND I AM RATHER INITIAL EM the MATTER, BUT I INCLUDES/UNDERSTANDS VERY QUICKLY. THANK YOU MATHIEU stixty@hotmail.com |
|
Gold Member Username: AdddisorderWest palm, Florida Post Number: 2253 Registered: Jan-06 | i have no idea what you jsut said other then help install my amp run a power wire with a fuse from battery to amp + then use a short wire to ground the amp from the - terminal to the cars chasis(scrape clean of paint) conncet a wire to the REM or remote to the bat + and put a switch on it this will turn the amp on and off. then in the speaker +- jsut run wires to your subs or speakers but really we need more info |
|
New member Username: StixtyMtl, Qbc Canada Post Number: 2 Registered: Dec-06 | Hello, I need information to install my reader Sony CDX-4050 in my Taurus L 1991 family. All the wire are cutting.And I don't know the function of wire. I'm sorry my english is not very good... |
|
Gold Member Username: AdddisorderWest palm, Florida Post Number: 2257 Registered: Jan-06 | run a power wire with a fuse from battery to amp + then use a short wire to ground the amp from the - terminal to the cars chasis(scrape clean of paint) conncet a wire to the REM or remote to the bat + and put a switch on it this will turn the amp on and off. then in the speaker +- jsut run wires to your subs or speakers you should get 4guage wire and you can buy that at www.knukonceptz.com |