New member
Username: Charlied87 Post Number: 2 Registered: Jun-06
Posted on
Wednesday, November 22, 2006 - 17:49 GMT i just bought 3 kicker CVX(15") and im wondering wat amp will push these subs
Gold Member
Username: B101 DD, RE, FI, TREO, KICKERUSA
Post Number: 3963 Registered: Sep-05
Posted on
Wednesday, November 22, 2006 - 17:51 GMT what is the voice coil configs on the subs, and whats their rated rms?
Gold Member
Username: Bestmankind Fi AudioBTL
Post Number: 7309 Registered: Oct-05
Posted on
Wednesday, November 22, 2006 - 17:54 GMT i thought you were getting the mag charlie?
New member
Username: Charlied87 Post Number: 5 Registered: Jun-06
Posted on
Wednesday, November 22, 2006 - 17:57 GMT hopefully this helps this is all i could find right now Nominal Impedance: Dual 4-Ohm Resonance Frequency: Hz 21.5 Power Handling Peak: 2000 Watts Power Handling RMS: 1000 Watts Total Q-Factor: 0.304 Equivalent Volume: 7.3 ft3 Outer Frame Diameter:15-7/16" Hole Cut-Out Diameter: 13 7/8" Mounting Depth: 8-1/4"
New member
Username: Charlied87 Post Number: 7 Registered: Jun-06
Posted on
Wednesday, November 22, 2006 - 18:00 GMT Chad Lee.. im a new user.. u must be referring to someone else with the same name
Gold Member
Username: Redliner Wilmington,
Ma
Post Number: 3038 Registered: Jun-05
Posted on
Wednesday, November 22, 2006 - 18:04 GMT omg i was so confused there. i was like i was the last poster how can that be. and yes chad i am getting the mag lol
Gold Member
Username: Bestmankind Fi AudioBTL
Post Number: 7310 Registered: Oct-05
Posted on
Wednesday, November 22, 2006 - 18:05 GMT lol. oh my bad. to answer question......a kicker kx2500.1 would power those subs up nicely. you would connect each voice coils in series first then connect each sub in parallel.
Silver Member
Username: Naledge503 Working on a secret pr...,
Oregon
USA
Post Number: 608 Registered: Jun-06
Posted on
Wednesday, November 22, 2006 - 18:05 GMT Those subs rms is 1000. you will need to wire them to a 2.66 ohm load. so you will need an amp that puts out a little more than 3000rms at 2 ohms. or you could get 3 amps that put out 1000rms at a 1 ohm load and wire each amp to its own sub.
Gold Member
Username: Tjmutlow Post Number: 3229 Registered: Sep-05
Posted on
Wednesday, November 22, 2006 - 18:23 GMT a zx 1000 per sub, those are dual 4 subs.
Silver Member
Username: Naledge503 Working on a secret pr...,
Oregon
USA
Post Number: 609 Registered: Jun-06
Posted on
Wednesday, November 22, 2006 - 18:29 GMT "or you could get 3 amps that put out 1000rms at a 1 ohm load and wire each amp to its own sub." my bad i mean 3 amps that put out 1000rms at a 2 ohm load.
Gold Member
Username: Bestmankind Fi AudioBTL
Post Number: 7311 Registered: Oct-05
Posted on
Wednesday, November 22, 2006 - 18:31 GMT the kicker kx2500 is 2500wrms at 2 ohms and is very underrated. it will push those subs well cause those subs don't require a full 1000wrms to get them movin. i've seen some cvx's sound good with only 750wrms. 3 1000wrms amps means alot more current draw so i hope you have a good charging system to run all of them.
Gold Member
Username: Redliner Wilmington,
Ma
Post Number: 3042 Registered: Jun-05
Posted on
Wednesday, November 22, 2006 - 18:48 GMT come on chad u should know me better than that first of would 3 15's fit in my car lol 2nd do u really think i would be buying these no offense to the other charlie i just hate kicker
New member
Username: Charlied87 Post Number: 10 Registered: Jun-06
Posted on
Wednesday, November 22, 2006 - 20:06 GMT no offense taken "charlie" but i appreciate yall helping me out .. thankss