|
Silver Member Username: BoomtankPost Number: 124 Registered: Oct-06 | I have some Kicker comp C154's and my buddy wants to by 2 of them but in a vented box. His availible space is 37x17x25(WxHxD). It would be going in a trunk so i was thinking subs and vent back. I used a tool to design the box but not sure if it will work. http://www.subwoofertools.com/forum/ported-box.asp?Ew=36&Eh=17&Dia=9&Xmax=13&Vd= .21&NumW=2&Vb=5.5&Fb=33&Qts=&Vas=&Fs=&CE=0 |
|
Silver Member Username: BoomtankPost Number: 125 Registered: Oct-06 | and what does this mean when the box spes turn out like this http://www.subwoofertools.com/forum/ported-box.asp?Ew=36&Eh=17&Dia=9&Xmax=13&Vd= .21&NumW=2&Vb=6&Fb=35&Qts=&Vas=&Fs=&CE=0 can u put the TEAL port board right up to the RED board or is that weird gap suposed to be there? |
|
Silver Member Username: BoomtankPost Number: 126 Registered: Oct-06 | anyone know what this is ? |
|
Gold Member Username: Tdeaton1021Near Tampa, Florida USA Post Number: 3382 Registered: Sep-04 | i think that happens every now and the. close the window, reopen it, and do it again. 5.5 cuft is kinda small for 2 15s... |
|
Silver Member Username: BoomtankPost Number: 127 Registered: Oct-06 | Would i be beter off just going 5.5 sealed since my frined has a small trunk? When i used them i had a 4cu^ft sealed and they hit hard off 350wrms to both |
|
Silver Member Username: BoomtankPost Number: 128 Registered: Oct-06 | i wanted to go 6cube but the program makes that funny port so i went 5.5 the kickers say 3-4cube per sub ported. so 6 would be fine. |
|
Gold Member Username: Tdeaton1021Near Tampa, Florida USA Post Number: 3384 Registered: Sep-04 | 6 net would be a minimum for ported, I'd do atleast 7 myself. sealed 4-5 cuft is good. But if you go sealed do a 2 chamber box with 2-2.5 each chamber. |