Bronze Member Username: Audio_newbPost Number: 13 Registered: Jul-06 | Today, i got 2 JBL 6x9s P959 or something like that. Well i also got a Power Acoustic 620watt max amp plasmasphere. I hooked everything up making sure all grounds were right and everything, i split the power coming from my battery to my little amp and big amp. My big amp is a Soundstream 880.2 and with 2 CVR 12s . Well anyways Whenever there is a hit in the music or whenever i turn it up loud, my small amp goes into protection mode. Where as my big amp hits as if nothing has happened. Any help would be wonderful. |
Silver Member Username: Tdawg30Ohio USA Post Number: 460 Registered: Jun-06 | prolly lack of power or your gain is set too high |
Bronze Member Username: Audio_newbPost Number: 14 Registered: Jul-06 | if it is lack of power why wouldnt the soundstream be cutting off? |
Bronze Member Username: Audio_newbPost Number: 15 Registered: Jul-06 | It was the gain thanks for the help |
Gold Member Username: JuliobSanto DomingoDominican Re... Post Number: 3246 Registered: Dec-05 | hehe of course is the gain, you should match it to your HU preout voltage |
Bronze Member Username: Audio_newbPost Number: 16 Registered: Jul-06 | it says it is 11-16 where should that be in relation on my amps gain? |
Gold Member Username: JuliobSanto DomingoDominican Re... Post Number: 3254 Registered: Dec-05 | do you have the model of your HU? |
Gold Member Username: TjmutlowPost Number: 3140 Registered: Sep-05 | do you have 1 speaker to 1 channel or do you have it bridged |
New member Username: XtseePost Number: 3 Registered: Nov-06 | i have the smae problem but with http://www.lanzar.com/itempage.asp?MODEL=VIBE256 and i have one sub bridged can anyone help? |
Bronze Member Username: Audio_newbPost Number: 17 Registered: Jul-06 | i fixed it i had it bridged becuase i cant get my left RCA working for somereason tomorrow im gonna check the lines, cause i dont know of anything else that would make my left rca channel not work, but when i had the rca cables hooked to my big amp they both hit... thanks for any additonal help |
Gold Member Username: TjmutlowPost Number: 3141 Registered: Sep-05 | josh, if your sub is a dual 4 and you have it bridged, then thats the porblem, that amp is only stable 4ohms bridged |
New member Username: XtseePost Number: 4 Registered: Nov-06 | then what should i do unbridge it? |
Gold Member Username: TjmutlowPost Number: 3153 Registered: Sep-05 | yes, |
Silver Member Username: JohammbassIRL Post Number: 543 Registered: May-06 | Yes, unbridge it and dig a tunnel underneath it instead |