Audioque question

AJ Bronze Member Username: Aj1218 Post Number: 29 Registered: Jun-06	Posted on Friday, October 13, 2006 - 22:34 GMT Are Audioque SD2.5 subs better in sealed enslosures or ported? I have two of these in 12 inches. Thanks in advance.
[Kéviñ_Previé] Gold Member Username: Frkkevin Lake Worth, Texas US Post Number: 1204 Registered: Nov-05	Posted on Friday, October 13, 2006 - 22:38 GMT depends on what your looking for.. if you want a flat response with more sq and less spl .. go sealed. if you have the room and like boomy bass thats more of an sql setup .. go ported
AJ Bronze Member Username: Aj1218 Post Number: 30 Registered: Jun-06	Posted on Friday, October 13, 2006 - 22:44 GMT Alright thanks I was thinking of sealed only because I don't have much room in my trunk. Do you know the approximate dimensions (ex: 30in x 16in x 16in) for a box that holds both of my subs with separated chambers? I am going to use 3/4" MDF. Thanks
[Kéviñ_Previé] Gold Member Username: Frkkevin Lake Worth, Texas US Post Number: 1207 Registered: Nov-05	Posted on Friday, October 13, 2006 - 22:52 GMT 14x30x12 should be fine.. after displacement of the subs and seperator your looking at roughly 2.6cu.ft.. 1.3cu.ft per sub 13x28x12 would put you at about 2.2 .. so 1.1cu.per chamber not much i can do for you unless i knew your max dimensions..
AJ Bronze Member Username: Aj1218 Post Number: 31 Registered: Jun-06	Posted on Friday, October 13, 2006 - 22:56 GMT Ok thanks. Those are external dimensions, right?
[Kéviñ_Previé] Gold Member Username: Frkkevin Lake Worth, Texas US Post Number: 1209 Registered: Nov-05	Posted on Friday, October 13, 2006 - 23:00 GMT whoops.. lol.. glad you asked that. that was internal my bad external- 14x30x12 would put you about 1cu.ft per chamber after displacement external- 14z30x14 would put you at about 1.25cu.ft after displacement
AJ Bronze Member Username: Aj1218 Post Number: 32 Registered: Jun-06	Posted on Friday, October 13, 2006 - 23:07 GMT Alright cool. Thanks for your help. I have only built about four subwoofer boxes before but I have been in the carpenter industry for quite a while now. I must say I am a novice when it comes to car audio so I thank you for your help. I should do fine with building the enclosure myself. Thank you

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us