Amp switching to protect and back to ON

 

Silver Member
Username: Johnfiac

IL USA

Post Number: 462
Registered: Mar-06
Ok, so i wired these PA mofo12's 2ohm DVC to 1ohm each and they are reading at 1.5ohm on my meter, and i tryed to hook up just one sub to the amp to run it at 1.5ohm so i kno how it will sound when i add the other amp to the other sub, it is a JBL BP1200.1 Mono amp and it is supposed to be 1ohm stable, i have the gain set to about a 4V and my head unit is a JVD KD-G820 4V preouts with bass boost on the amp to about 5db and freq. to about 120HZ or so the sub is in a 1.25 cube ported and tuned to like 43-53 one or the other.. any one have any ideas?
 

Gold Member
Username: Juliob

Santo DomingoDominican Re...

Post Number: 2652
Registered: Dec-05
good amp, crappy subs
 

Silver Member
Username: Johnfiac

IL USA

Post Number: 463
Registered: Mar-06
it did it with the immortals too but even worse... i gave the subs even less power at higher ohms and still did it
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us