|
Silver Member Username: KravenbloodOhio Post Number: 103 Registered: Aug-05 | whats a website to calculate sqaure ports. and if i use a round port whats the smallest size you would go for a 15 inch sub with 40 mm xmax? |
|
Gold Member Username: Basshead86Google is your Friend, FL Post Number: 5430 Registered: Aug-05 | 2 4in. aeros per cube that is a lot of throw....you will need to move some air. |
|
Silver Member Username: Crayola0Wisconsin Post Number: 906 Registered: Jun-06 | i think aeros would be the easiest to do. |
|
Silver Member Username: KravenbloodOhio Post Number: 104 Registered: Aug-05 | 2 4" in per 1 cube in a 3 cube box thats six tubes at 106 inches each aint going to work lol oh its getting tuned to 25 hz.. what about 2 6" at 76.89 inched lol |
|
Silver Member Username: KravenbloodOhio Post Number: 106 Registered: Aug-05 | what about 2" and 10 of them at 43.69" |
|
Gold Member Username: Basshead86Google is your Friend, FL Post Number: 5441 Registered: Aug-05 | you asked...i threw out a number...and you said what about this. see where i am at right now? lol do the 2-6" tubes |
|
Silver Member Username: KravenbloodOhio Post Number: 107 Registered: Aug-05 | yeah i think i will thats still alot of bending of pvc pipes lol |
|
Silver Member Username: FrkkevinLake Worth, Texas US Post Number: 599 Registered: Nov-05 | http://www.subwoofertools.com/forum/ported-box.asp? ... just use a square port with 14-16 square inches of port per cubic foot of box.. easier lol |
|
Silver Member Username: KravenbloodOhio Post Number: 108 Registered: Aug-05 | i used that it makes the box to big plus my box is a odd shape |
|
Silver Member Username: FrkkevinLake Worth, Texas US Post Number: 604 Registered: Nov-05 | sounds strange to me.. with the correct info I've been able to manipulate it to fit into my Jettas trunk. What are you trying to tune to? If you gave me some dimensions I and speaker displacement I could see what I get.. |
|
Silver Member Username: KravenbloodOhio Post Number: 110 Registered: Aug-05 | the box im makeing is going into a tire well so its a slanted box so that link dont help me. http://www.subwoofertools.com/forum/ported-box.asp?Ew=25&Eh=25&Dia=9&Xmax=40&Vd= .289&NumW=1&Vb=3&Fb=25&Qts=&Vas=&Fs=&CE=0 theres the numbers the box comes out to be the area of about 9 cubic feet to big lol |
|
Silver Member Username: FrkkevinLake Worth, Texas US Post Number: 613 Registered: Nov-05 | why are you tuning it for 25hz? your making it 25x25? .. does the height matter? and why slanted? |
|
Silver Member Username: KravenbloodOhio Post Number: 112 Registered: Aug-05 | why not tune it to 25 hz.. no im not makeing it 25 x 25 that was just an exapmle that the box comes out to the area of 9 cubic feet.. im makeing it slanted cause thats how i can get the most space out of my tire well |
|
Gold Member Username: Basshead86Google is your Friend, FL Post Number: 5586 Registered: Aug-05 | why tune it to 25hz???? is this a HT setup?? you lose the advantages of porting a box when tuning it that low. |
|
Silver Member Username: KravenbloodOhio Post Number: 113 Registered: Aug-05 | thats what cerwin vega says to tune it too for optimul perfomance ask them lol.. SO thats what im tuneing it too... if i get my stroker 15 fix ill port that too 32hz instead lol |