Bronze Member Username: MhrxHayden, ID USA Post Number: 17 Registered: Aug-04 | I decided to go with a 12w6v2 for my truck, but I still don't know a lot about amplifiers. Will my amp power it to full potential? (the sub is 400 watt RMS power range) It's a lightning audio x1.400.2. I found these specs on it: Dual Channel Bridgable RMS Power at 4 Ohms 100 W x 2 RMS Power at 2 Ohms 200 W x 2 Probably not the best amp, but will it get the job done? What I get confused with is Ohms. The JL sub is a dual 4 Ohm, is my amp set up for this? Sorry if these are bad questions...I'm still learning, lol. thanks for the help |
Silver Member Username: StnorrisEldridge, IA US Post Number: 844 Registered: Apr-06 | a dual 4 ohm sub, will wire to 2 ohms on an amp. so thats means ur only choice is 200rms x 2. no this amp wont get the job done. it will be like wasting the sub. if you had the dual 2 ohm jl, you could wire it to 4 ohms though, and get 400rms. 100x2 @ 4 ohms 200x2 @ 2 ohms 400x1 @ 4 ohms |
Silver Member Username: StnorrisEldridge, IA US Post Number: 845 Registered: Apr-06 | theres alot of jlw6 on ebay, and u could get one for not too much. theyre 300rms and if you got the dual 2 ohm sub, and then bridged the amp, you could full power one. unless the amp is highly overrated, then it will be close |
Bronze Member Username: MhrxHayden, ID USA Post Number: 18 Registered: Aug-04 | shoot. Luckily I wanted to ask before buying the sub. Does JL make a dual 2 ohm in the W6? All I see is the W3. Is there an alternitve amplifier that would work thats fairly cheap? |
Silver Member Username: StnorrisEldridge, IA US Post Number: 846 Registered: Apr-06 | yep. a perfect amp would be the phoenix gold 400.1. that will work perfect for dual 2 ohm or dual 4 ohm. u can get the amp for around 140 shipped off of ebay, and its a great amp. |
Gold Member Username: RovinTrinidad & T... Post Number: 8564 Registered: Jul-05 | the real perfect amp 4 it would be a JL 500/1 - check ebay ...... |
Silver Member Username: StnorrisEldridge, IA US Post Number: 856 Registered: Apr-06 | ya, but the sub is only 300rms, and that pg would push it fine. u can get 2 pgs, for the price of one jl 500/1 on ebay. |
Gold Member Username: RovinTrinidad & T... Post Number: 8567 Registered: Jul-05 | "I decided to go with a 12w6v2" its 400wrms & lots of ppl on this forum has a 500/1 on their's http://mobile.jlaudio.com/products_subs.php?series_id=4 |
Silver Member Username: StnorrisEldridge, IA US Post Number: 870 Registered: Apr-06 | i saw some jlw6s on ebay, that looked older, and they said 300rms. the old ones must be rated at that then... |
Silver Member Username: NikoncdPost Number: 111 Registered: Jul-05 | 500/1 on my 10w6 - thinkin' I should have went with the 12, but eh hind-sight 20/20 |
Silver Member Username: Loc_outSanta Ana, Ca Post Number: 487 Registered: Feb-05 | I say go with the 12w6v2 and a 500/1. Maybe a 13w6v2 and a 500/1. |
Silver Member Username: StnorrisEldridge, IA US Post Number: 925 Registered: Apr-06 | go with the 13 |