Bronze Member
Username: Poremski1628 Post Number: 17 Registered: Jun-06
Posted on
Friday, July 07, 2006 - 20:46 GMT I already have one amp set up with a 4 gauge wire powering my speakers. Which would be a better way to power a new amp should i run another power cable or switch the 4gauge wire with a 0gauge and use a distribution block?
Gold Member
Username: Juliob Santo DomingoDominican Re...
Post Number: 1181 Registered: Dec-05
Posted on
Friday, July 07, 2006 - 20:52 GMT i always use distibution block, but that's personal, do it the way you want, but with a dist/block is safer
Gold Member
Username: Blainew Post Number: 1350 Registered: Nov-05
Posted on
Friday, July 07, 2006 - 23:41 GMT just use 2
Bronze Member
Username: Sheikers Post Number: 11 Registered: Jul-06
Posted on
Saturday, July 08, 2006 - 02:16 GMT use 2 ,much better
Silver Member
Username: Kklagge Post Number: 251 Registered: Dec-04
Posted on
Saturday, July 08, 2006 - 14:36 GMT How is a distro block safer?
Gold Member
Username: Rovin Trinidad & T...
Post Number: 8412 Registered: Jul-05
Posted on
Saturday, July 08, 2006 - 15:12 GMT it has fuses on it ^^^....
Silver Member
Username: Kklagge Post Number: 258 Registered: Dec-04
Posted on
Saturday, July 08, 2006 - 15:17 GMT well so do the 2 wires I have going to my amps
Gold Member
Username: Rovin Trinidad & T...
Post Number: 8415 Registered: Jul-05
Posted on
Saturday, July 08, 2006 - 15:51 GMT advantage of a single wire is cost , takes up less space & easier to run 1 wire than 2 but i really dont see what is wrong with either method so whichever is fine ....
Bronze Member
Username: Clouduz Post Number: 33 Registered: Jun-06
Posted on
Saturday, July 08, 2006 - 21:57 GMT that's good to hear i thought if you had more than one amp you HAD to have a dist block. Well, looks like i will do the 2 wire method