12" mtx 6000 series sub
|
New member Username: Gojoecrewchief1Post Number: 2 Registered: Jun-06 | Looking for a good amp and enclosure for these subs they are going into a neon. any help would be appreciated... going to ebay the amp let me know looking for cheapness would a mtx 4250d be a good amp?? |
|
Gold Member Username: Dustin3Tigard, Or U.S. Post Number: 1876 Registered: Oct-05 | wuts the rms on each sub? cant find that sub anywhere, not even on their website... |
|
New member Username: Gojoecrewchief1Post Number: 3 Registered: Jun-06 | Product Type Car subwoofer driver Depth 6.1 in Dimensions - Diameter 12.4 in Localization English Speaker System Speaker Type Passive Speaker Diameter 12" Nominal (RMS) Output Power 250 Watt Max (RMS) Output Power 500 Watt Response Bandwidth 33 - 150 Hz Input Impedance 4 Ohm Sensitivity 87.4 dB Connectivity Technology Wired Additional Features Dual voice coil Speaker System Details Speakers Included 1 x car subwoofer driver - 12" - 250 Watt - 33 - 150 Hz - 4 Ohm - wired Driver Details Car subwoofer driver : 1 x subwoofer driver - 12" - Mica-Filled Polypropylene (MFP) Cutout & Mounting Dimensions Diameter 11 in Depth 5.6 in Manufacturer Warranty Service & Support 1 year warranty Service & Support Details Limited warranty - 1 year thats the best info page i have been able to find and i dont think that it is the exact same amp maybe a few years newer but thats ok just need to know what may work the best |
|
Gold Member Username: Dustin3Tigard, Or U.S. Post Number: 1881 Registered: Oct-05 | ok, so the rms is 250 and you have 2 woofer which means you need a 500 watt amp. i am assuming you have the DVC 4 ohm subor do you have the dual voice coil 2 ohm subs????????? that mtx amp only puts out 350... you need a bigger amp. buy this: https://www.ecoustics.com/electronics/forum/car-audio/242545.html if you have the DVC 4 ohm woofer |
|
Gold Member Username: Dustin3Tigard, Or U.S. Post Number: 1882 Registered: Oct-05 | http://cgi.ebay.com/HIFONICS-BXi606-Mono-Amplifier-Amp-BXi-606-New-BX605_W0QQite mZ9744597747QQihZ008QQcategoryZ18797QQrdZ1QQcmdZViewItem this also or pheonix Gold xenon 600.1 (best one) http://cgi.ebay.com/Phoenix-Gold-XENON-600-1-X600-1-CLASS-D-Amp-NEW-05-600W_W0QQ itemZ250001359947QQihZ015QQcategoryZ18797QQssPageNameZWDVWQQrdZ1QQcmdZViewItem |
|
New member Username: Gojoecrewchief1Post Number: 4 Registered: Jun-06 | ok, so the rms is 250 and you have 2 woofer which means you need a 500 watt amp. i am assuming you have the DVC 4 ohm subor do you have the dual voice coil 2 ohm subs????????? I really dont know how to tell if i have the dual voice coil is there a way bassman? |
|
Silver Member Username: Rick_rossPost Number: 146 Registered: May-06 | there will be 4 voice coils |
|
Silver Member Username: Rick_rossPost Number: 148 Registered: May-06 | if you dont no what a voice coil is its on the back of the sub where you plug the wire in |
|
New member Username: Gojoecrewchief1Post Number: 7 Registered: Jun-06 | this is a picture of where the wires conect it seems to me it would be 2 voice coils?  |
|
Silver Member Username: Rick_rossPost Number: 154 Registered: May-06 | yea so its single voice coil so you can only run it at 4 ohms |
|
Silver Member Username: Rick_rossPost Number: 155 Registered: May-06 | unless you have 2 of them then you can run them at 2 ohms if you put them on 1 channel |
|
New member Username: Gojoecrewchief1Post Number: 8 Registered: Jun-06 | ok so far so good thanks for your help, pretty much i need to get a amp that can run @ 500rms for these 2 12's sounds good |
|
Silver Member Username: Rick_rossPost Number: 157 Registered: May-06 | id get the xenon 600.1 like he said cause then you can run them anywhere from 1 to 4 ohms and itll be the same |
|
Silver Member Username: JuliobSanto DomingoDominican Re... Post Number: 858 Registered: Dec-05 | or alpine mrd 605 |
|
Silver Member Username: Rick_rossPost Number: 160 Registered: May-06 | you cant just get any amp thats 500 rms it has to be either 500x1 at 2 ohms or 250x2 at 4 ohms |
|
Silver Member Username: JuliobSanto DomingoDominican Re... Post Number: 860 Registered: Dec-05 | WTF, alpine is 600x1 at 2 ohms |
|
Silver Member Username: Rick_rossPost Number: 161 Registered: May-06 | i wasnt talkin about that amp thats a good amp to use i wrote that before i saw that posted |
|
New member Username: Gojoecrewchief1Post Number: 9 Registered: Jun-06 | ok but the xeon 600.1 is a good amp for those subs? cause thats kinda what i just bought before i saw the repost. kinda stupid but my bad |
|
New member Username: Gojoecrewchief1Post Number: 10 Registered: Jun-06 | ok but the xeon 600.1 is a good amp for those subs? cause thats kinda what i just bought before i saw the repost. kinda stupid but my bad |
|
Silver Member Username: Rick_rossPost Number: 163 Registered: May-06 | yea that would be a good amp for those subs |
|
Gold Member Username: Dustin3Tigard, Or U.S. Post Number: 1907 Registered: Oct-05 | are those VC on both sides of the sub? b/c that would be dual voice coil if there is that on both sides... |
|
Silver Member Username: JuliobSanto DomingoDominican Re... Post Number: 868 Registered: Dec-05 | get the PG xenon so you don't have to worry about how many VC lol! |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics