New member
Username: Jeepgc Post Number: 5 Registered: May-06
Posted on
Saturday, June 03, 2006 - 22:30 GMT What gauge power and ground wire would you recommend to power an amp that will be powering 1 or 2 Type R's?
New member
Username: Jirvin_82 Post Number: 8 Registered: May-06
Posted on
Monday, June 05, 2006 - 16:47 GMT 4 gauge for your power cable and anywhere from 6-8 for your ground cable
Gold Member
Username: Tjmutlow Post Number: 2181 Registered: Sep-05
Posted on
Monday, June 05, 2006 - 17:12 GMT ground and power s/b same, use 4 guage and keep ground as short as possible
Silver Member
Username: Drivingreckless Near tampa,
Florida
United state...
Post Number: 736 Registered: Apr-06
Posted on
Monday, June 05, 2006 - 17:18 GMT i would just go with 4 gauge for both the ground and power wire...make sure ur ground is less or equal to 24"
Gold Member
Username: Alias747 MN
Post Number: 1046 Registered: Apr-05
Posted on
Monday, June 05, 2006 - 17:19 GMT Yes, your ground cable is key for a strong system. ALWAYS use the same gauge cable as the power. And try to keep the length to under 18", 12" is even better.