|
New member Username: Superroofer04Darien, CT United States Post Number: 7 Registered: May-06 | I am in the process of building my own subwoofer enclosure. I'm at the point where I need to figure out how I am going to wire it, and to what. I have 3 10" 600 watt rms Audiobahn AW100vs, but no idea where to go from here. I know theyre 4 ohms, and in the manual that came with them it said i can run them at many different ohm's so im very confused. If someone can help me find an amp thats reasonably priced, or tell me what I need in an amp to power them, as well as help with wiring id really appreciate it. Thanks. |
|
Gold Member Username: RovinTrinidad & T... Post Number: 8022 Registered: Jul-05 | use this guide & see what works best with ur subs ..... http://www.the12volt.com/caraudio/woofer_configurations.asp |
|
Silver Member Username: TweekerPost Number: 154 Registered: May-06 | you need a 1500-1800rms amp then we can see how you can wire your subs best for the amp. dont go cheap on the amp like the subs. |
|
New member Username: Superroofer04Darien, CT United States Post Number: 8 Registered: May-06 | would a BOSS GT1500D 1500 WATT CLASS D MONO AMPLIFIER do the job? |
|
New member Username: Superroofer04Darien, CT United States Post Number: 9 Registered: May-06 | or a HiFonics Brutus BXi1606D 1600 Watt Super D-Class Mono Amp? |
|
Gold Member Username: Dustin3Tigard, Or U.S. Post Number: 1423 Registered: Oct-05 | well if their each dual 4 ohm sub then ur best bet is to wire them to a 2.6 ohm load (or 2, but will sacrifice power) or a 6 ohm load. the hifoncs is 1400 @ 1ohm. i dont like boss amps |