What to set amp one the

Mr_Kebo Silver Member Username: Mr_kebo Albertville, Al USA Post Number: 343 Registered: Nov-04	Posted on Saturday, May 27, 2006 - 02:49 GMT I have the 6500's from eD and an eD NINe.2x amp. what should i set the filter to, lp,full,or hp. if hp what should i set it to?
bassman3 Gold Member Username: Dustin3 Tigard, Or U.S. Post Number: 1262 Registered: Oct-05	Posted on Saturday, May 27, 2006 - 03:59 GMT low pass, becaue ur not going to be using any high freq. subsonic filter is what ur ported box is tuned to. LP should be set around 80
Mr_Kebo Silver Member Username: Mr_kebo Albertville, Al USA Post Number: 344 Registered: Nov-04	Posted on Saturday, May 27, 2006 - 06:38 GMT its a componet set. So there will be some high freqs!
MO Gold Member Username: Suleman36 Maryland U.S.A. Post Number: 3838 Registered: Feb-05	Posted on Saturday, May 27, 2006 - 06:44 GMT Mr Kebo, set your amp to HPF and set the crossover at 12db @ 100hz Usually 100-125hz is best for components. It will cut out all those low freq that speakers are not suppose to handle. Leave that for your subwoofer. Set your subwoofer amp LPF to 18 or 24db @ 80hz That will give you great results and sound better.
Mr_Kebo Silver Member Username: Mr_kebo Albertville, Al USA Post Number: 345 Registered: Nov-04	Posted on Saturday, May 27, 2006 - 06:49 GMT thanks
mat hooker Silver Member Username: Adddisorder West palm, Florida Post Number: 267 Registered: Jan-06	Posted on Saturday, May 27, 2006 - 16:31 GMT MO maybe im wrong here but couldnt you just leave your amp crossover on full because it is a component set and has its own crossover for the midbass diver and tweeter?

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us