|
New member Username: UnderwoodPost Number: 1 Registered: May-06 | Ive recently bought 2 600w subs with a 150w rms for each, im now looking to buy an amp to hook these bad boys up, im not sure on wat power amp will be required! Any help would be very much appreciated as i want to get set up before the summer :o) |
|
Bronze Member Username: B_sonPost Number: 35 Registered: Apr-06 | model # of subs and budget |
|
New member Username: UnderwoodPost Number: 2 Registered: May-06 | KFC-W300S Im a student so i don't have the biggest of budgets, anywhere really under 150. a good cheap amp would be great but life isnt as easy as that.. |
|
Silver Member Username: CtmikeCt. Post Number: 648 Registered: Feb-06 | i think alex meant the voice coil of the subs, need to know that for the amp. but here's a couple under $150, the second works if there dvc 4ohm http://cgi.ebay.com/PHOENIX-GOLD-XENON-X400-1-400W-MONOBLOCK-AMPLIFIER-NEW_W0QQi temZ9729383935QQcategoryZ18797QQrdZ1QQcmdZViewItem http://cgi.ebay.com/HIFONICS-TITAN-TXi5006-500W-MONO-CLASS-A-B-AMP-NEW-2006_W0QQ itemZ9731009427QQcategoryZ18797QQrdZ1QQcmdZViewItem |
|
New member Username: UnderwoodPost Number: 3 Registered: May-06 | Injection PP cone 500g (17.6 oz) magnet Frequency response 30 - 600Hz Sensitivity 91dB/W at 1m thats all i know sorry, im new at this, trying to get to grips with everything and understand. They are pritty standard subs as i didnt want to spend too much at first... They arent dual voice coil otherwise it would of said. I hope this will be sufficient. Thank you =D |
|
New member Username: UnderwoodPost Number: 4 Registered: May-06 | impedance is 4ohm |
|
Silver Member Username: CtmikeCt. Post Number: 651 Registered: Feb-06 | i'd go with that pg above, or look on ebay for maybe a cheaper amp that does around 400-500wrms at 2ohm. |
|
New member Username: UnderwoodPost Number: 5 Registered: May-06 | ok thats great thanks, will this run both subs? does it need to be bridged? |
|
New member Username: UnderwoodPost Number: 6 Registered: May-06 | i was browsing on ebay and found this amp, just to get my head round things say if i had this could i use 2 channels to power my two subs and at 4ohm would it means for 2 channels i would get 250rms for each channel?? there for satisfying the need of my two subs? http://cgi.ebay.co.uk/1000-WATT-CAR-AMPLIFIER-4-CHANNEL-BRIDGEABLE-MOSFET_W0QQit emZ9731169176QQcategoryZ4950QQrdZ1QQcmdZViewItem |