How do i wire my two 12" subs

Sean Pickup New member Username: Sgpickup WA USA Post Number: 3 Registered: May-06	Posted on Tuesday, May 16, 2006 - 16:35 GMT i have a 2 channel/mono california profile amp and 2 12" alpine type-e subs. the subs are 4 ohms each and the amp can only be wired, in mono mode, at a 4 ohm minimum. how do i wire my subs to the amp at 4 ohms. i do not want to wire them at 8 ohms. should i just wire each sub up to a channel output instead of the mono? can someone help me?
MO Gold Member Username: Suleman36 Maryland U.S.A. Post Number: 3727 Registered: Feb-05	Posted on Tuesday, May 16, 2006 - 16:49 GMT You can figure that one out right here. You need to know if your subs are dual 4 ohm or single 4 ohm and it will tell you how to wire it. http://www.the12volt.com/caraudio/woofer_configurations.asp
Sean Pickup New member Username: Sgpickup WA USA Post Number: 4 Registered: May-06	Posted on Tuesday, May 16, 2006 - 17:00 GMT thanks, that helps alot.