Jl audio 500/1

josh mistic Bronze Member Username: Mythy225719 Post Number: 20 Registered: Apr-06	Posted on Saturday, May 06, 2006 - 06:36 GMT will it give me 500W RMS at a 2ohm load? Thanks for your time.. I noticed on the specs it says 1.3 - 4 ohms.. but I seen others say it only does 250W at 2 ohms so I'm confused...
gage ware Silver Member Username: Gage Post Number: 254 Registered: Feb-06	Posted on Saturday, May 06, 2006 - 06:56 GMT no it will give yo 500 from 1.5-4 ohm loads
Chauncey Brown Gold Member Username: Chaunb3400 Huntsville, Alabama U.S. Post Number: 6862 Registered: Jul-05	Posted on Saturday, May 06, 2006 - 07:09 GMT a Phoenix Gold 600.1, puts out 600rms 1-4 ohm loads
josh mistic Bronze Member Username: Mythy225719 Post Number: 21 Registered: Apr-06	Posted on Saturday, May 06, 2006 - 16:43 GMT ok, so since 2 ohms is inbeetwen then it will give me 500W RMS at 2 ohms... right?
JohnnY B Silver Member Username: Johnny619 San Diego, CA Post Number: 137 Registered: Dec-05	Posted on Saturday, May 06, 2006 - 18:11 GMT yes it will give you 500 watts at 2 ohm
Brandon Gold Member Username: Theelfkeeper Stockbridge, GA USA Post Number: 2005 Registered: Feb-05	Posted on Saturday, May 06, 2006 - 20:12 GMT you'll get 500 at any impedance between 1.5 and 4. it doesn't change due to the R.I.P.S. feature. most amps, the impedance greatly affects the output but not the JL Slash Series.