I have one New 06' square l7 15inch kicker that is 4ohms. And then I have a new memphis mono amp that is rated at 1100rms. What is the best way of hooking this up can someone help please, I need to bang.....
Your amp is rated at 1,100w RMS at 1 ohm, but you can only wire that one sub down to 2 ohms. Depending on the rating for that sub, you probably need a 2 ohm DVC L7 so you can wire it at 1 ohm.
lol... Why dont u get another of both the amp and the sub (if your alternator and battery can handle 2200w of constant power), and a distrubution block... then it will be no question... your rod will definitly bang... HARD!!! Solo barics are the best subs out (so i've heard). And 1100 watts for just one sub iz rediculous. Sounds like my type of system
I had the 15 custom installed in the wheel well so theres not much room for another one. I think its plenty loud for me but does anyone no how high i can turn my gain up. when I get my camera from my girlfriend i'll show some pictures. I also have a kenwood ddx7017 with tv tuner, dvd player , ipod, and a one of kind old school nintendo with wireless controllers
He's not running 1100w with that 4 ohm DVC sub. More like 600w or so at 2 ohms. He has to drop it to 1 ohm to get the 1100w and that's not possible with his sub.
The gain control should be on top or on the side of the amp. It might be labeled as input sensitivity. Just remember it's not a volume control.
"lol... Why dont u get another of both the amp and the sub (if your alternator and battery can handle 2200w of constant power), and a distrubution block... then it will be no question... your rod will definitly bang... HARD!!! Solo barics are the best subs out (so i've heard). And 1100 watts for just one sub iz rediculous. Sounds like my type of system"
Where do you get your info? Solo Barics are shitt for SQ and MTs are louder.
ANy one heard of a bridgeing module before. There is a picture of one that came with my amp. It looks to me like thats how hooking 2 amps to the one sub would work.
