|
Bronze Member Username: Mike_botelloMuskegon, MI USA Post Number: 25 Registered: Feb-06 | I have 2 cvr12's in a sealed enclosure and the box is leaking pretty good so im going to take that and some subs i got from circuit city back and get a new box so i was wondering if this box would sound good with the cvr's...http://www.circuitcity.com/ssm/Bass-Slammer-Dual-Vented-Subwoofer-Enclosure-BS21 2V-/sem/rpsm/oid/119725/catOid/-13094/rpem/ccd/productDetail.do |
|
Gold Member Username: James1115Ct Post Number: 5398 Registered: Dec-04 | yes it will sound good compared to a bad built sealed box. make sure you find out what it is tuned to and set your SS filter accordingly. |
|
Bronze Member Username: RwellsPost Number: 15 Registered: Mar-06 | did you happen to buy that sealed box at circuit city? cause i just bought mine there for my CVR's cause im lazy. and im worried about its performance in the longrun! |
|
Bronze Member Username: Rustysurfer916Post Number: 89 Registered: Mar-06 | if you wanted to get the best sound quality and the most accurate box look at the air space needed for those subs and build it yourself. but only if you know what your doing. its not hard at all. i built my own for my cvr's and it sounds damn good and loud as hell |
|
Silver Member Username: John_washNashville, Tennessee Post Number: 161 Registered: Dec-05 | matt do urs go low. |
|
Bronze Member Username: Mike_botelloMuskegon, MI USA Post Number: 26 Registered: Feb-06 | brandon.. yeah i did buy the sealed box at circuit city.. its a q-logic box but im not sure on the model.. yeah i was thinking about building my own but i dont really understand the tuning part of it but i know i could build it.. i will prolly go that route but now i have $160 dollars of store credit i need to spend |
|
Bronze Member Username: Mike_botelloMuskegon, MI USA Post Number: 27 Registered: Feb-06 | could someone maybe post measurements of a box that would work well with the cvrs..? i know someone was sellin cut out sheets or somethin for boxes for $10 maybe if i can remember who that was i will do that.. |
|
Silver Member Username: John_washNashville, Tennessee Post Number: 162 Registered: Dec-05 | it was wahl mike here is his email address sploosh76@yahoo.com |
|
Bronze Member Username: RwellsPost Number: 18 Registered: Mar-06 | o mine is a mtx bassSlammer box thats sealed. not qlogic. hopefully this one will do better. if not ill just build my own |