|
Bronze Member Username: Liqdfire3Lee high acres, Florida Post Number: 60 Registered: Sep-05 | i know we get alot of these in here, but i just have to ask before making a commitment to buying this sub. right now i have a 10" L5 dual 2 ohm sub in a 1.8 cuft. ported box tuned to 33hz. would a brahma 10" dual 2 ohm be louder and with the same box and same amp? i know it will have better sound quality, but my L5 gets pretty damn loud for just 1 10" sub. |
|
Bronze Member Username: Liqdfire3Lee high acres, Florida Post Number: 61 Registered: Sep-05 | Brahma Mark III DRIVER Brahma 10D2 Fs 21 Hz Qes 0.37 Qms 10.3 Qts 0.35 Vas 39.7 liters Re 2 x 1.4 Ohms Le 2 x 0.5 mH BL 12.8 Xmax1 28.5mm Sd 286 cm2 SPL2 82.2 dB Pmax3 600W MSRP 389.00 |
|
Bronze Member Username: CtmikeCt. Post Number: 98 Registered: Feb-06 | i would say the brahma might be louder, but i think, and i'm no expert so don't just take my word, it might need a smaller box than 1.8. |
|
Bronze Member Username: Liqdfire3Lee high acres, Florida Post Number: 62 Registered: Sep-05 | what about an re sx 10" sub dual 2 ohm? |
|
Bronze Member Username: CtmikeCt. Post Number: 99 Registered: Feb-06 | sx, loud and better sq. |
|
Bronze Member Username: Liqdfire3Lee high acres, Florida Post Number: 63 Registered: Sep-05 | but would it be louder than the L5? |
|
Gold Member Username: Chaunb3400Huntsville, Alabama U.S. Post Number: 6244 Registered: Jul-05 | sx would kill the L5 in every category, the L7 would be able to hold its own in spl againts a sx not in sq though |
|
Silver Member Username: CtmikeCt. Post Number: 101 Registered: Feb-06 | i've only heard one sx, and it was a 12" and it was loud. i'm far from the most knowledgable person on this site but i would go with the sx. it will definately get loud and again it will have better sq. louder than the l5, i think so, maybe just under if anything. personally i would get the sx just because the sq is better, it will play extremely loud, and will hold up better then the l5. by the way, can you fit 2 10"s? and what amp are you using? |
|
Bronze Member Username: Liqdfire3Lee high acres, Florida Post Number: 64 Registered: Sep-05 | yeah i could prolly fit two 10's in a sealed box at prolly 1 cu ft per chamber. the amp i have now is a kenwood 9512d. 900 rms at 1 ohm. i also have a power acoustik 2400d. but the output terminals are bad and i cant recieve anything from it. if anyone knows how to fix this, PLEASE let me know. |
|
Silver Member Username: CtmikeCt. Post Number: 102 Registered: Feb-06 | i'd get a new amp. kenwoods aren't the best and alot of them tend to overheat and shut off. and i would go with two 10's if you can fit/afford them. just remember to upgrade your alt. and battery if planning to run some high power amps. |
|
Bronze Member Username: Liqdfire3Lee high acres, Florida Post Number: 65 Registered: Sep-05 | i might be able to fit a 12" sub. the bow is 13.25" wide made with 3/4 inch mdf board. the cutout diameter of the 12" sx is 11.125" so i should be able to mount that in there right? but i dont think my amp will be able to keep up with that sub and i just baught this amp. dammnit |
|
Bronze Member Username: Liqdfire3Lee high acres, Florida Post Number: 66 Registered: Sep-05 | yeah i am looking into gettin a new alternator, but i cant find anyone who sells a 220 amp alternator for a 2006 gmc sierra. |
|
Silver Member Username: CtmikeCt. Post Number: 103 Registered: Feb-06 | try one of these: http://excessiveamperage.com/ http://ohiogen.com/ theres' alot of other companies but i cant find the links. |
|
Bronze Member Username: FookySt Lucia, We... Post Number: 51 Registered: Feb-06 | Which one would be Louder......?????? AA Arsenals 12" 700 RMS or Pioneer3000SPL 12" |