Not wired correctly?
|
Silver Member Username: ThigpenRVA, Va Usa Post Number: 497 Registered: Sep-05 | I dont feel like im getting the full potential out of my 2 12" RE SE's on a re 12.1. On my stock alt, my voltage holds around 13.8 when running and is about 14.2 when i first turn my car on. that seems little high for 1500 watts on a stock alt. any chance my subs were wired at 4 ohms instead of 1? |
|
Gold Member Username: RovinTrinidad & T... Post Number: 6243 Registered: Jul-05 | "any chance my subs were wired at 4 ohms instead of 1?" - only way of knowing that is remove the subs (if u can't remember how u did it) & check back how its wired ........ |
|
Silver Member Username: ThigpenRVA, Va Usa Post Number: 499 Registered: Sep-05 | I didnt wire them. I got a friend from school who works at best buy installing. He had just started installing and knows what hes doing but im thinking maybe he just goofed? |
|
Gold Member Username: RovinTrinidad & T... Post Number: 6244 Registered: Jul-05 | He prolly did open it up & use this guide http://www.the12volt.com/caraudio/woofer_configurations.asp BTW : is there 1 single +/- attached 2 ur amp or 2+ & 2- !???? if 1 wire then it should be wired like this  if 2 sets or wires then each sub should be wired like this  those r the only 2 ways it should be ..... |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics