|
Silver Member Username: HomegrowncamWatauga, TX United States Post Number: 186 Registered: Jan-05 | So I was wondering, I already have this sx900.4. Well bridged down to 2 channels it prodcues 450 watts @ 4 ohms. Could I just wire those 2 channels to each voice coil? |
|
Silver Member Username: GoatinU.S.A Post Number: 362 Registered: Jan-06 | what sub do you think your going to run with that? |
|
Silver Member Username: HomegrowncamWatauga, TX United States Post Number: 187 Registered: Jan-05 | well first I wanted to know if it was possible. If so then do I look at something with 900 watts and at 4ohms or 2 ohms? |
|
Silver Member Username: HomegrowncamWatauga, TX United States Post Number: 188 Registered: Jan-05 | bump |
|
Silver Member Username: HomegrowncamWatauga, TX United States Post Number: 192 Registered: Jan-05 | bump |
|
Silver Member Username: N2audioLawrence, Ks USA Post Number: 610 Registered: Mar-04 | you could do it with a dvc4, but getting the gain and x/o set exactly the same and getting it to sound good may be a headache. With the DSP capability of that amp it might be doable without too much hassle. |
|
Gold Member Username: TjmutlowPost Number: 1506 Registered: Sep-05 | Why do that to a sub that is not meant to be ran like that..... |
|
Silver Member Username: HomegrowncamWatauga, TX United States Post Number: 195 Registered: Jan-05 | I hear about people doing it in non-daily setup, why wouldnt it work in a daily? |
|
Gold Member Username: B101Queen City, NC USA Post Number: 1351 Registered: Sep-05 | it will work daily & at comp! nothing wrong with doing this at all, if gains and all settings are matched to each other. He will get way more power to the sub, it will be MUCH happier! |
|
Silver Member Username: HomegrowncamWatauga, TX United States Post Number: 196 Registered: Jan-05 | See that was what I was thinking and since I have the DSP on it like apoti said it would be easy to tune. Any suggestions though on subs, I am stumped. |
|
Gold Member Username: Mikechec9Http://www.cardomain.c... Post Number: 2171 Registered: May-05 | In my experience and position, it is not a problem. Regardless of gain setting: http://www.adireaudio.com/Files/TechPapers/DualVoiceCoilDrivers.pdf JL carries a different view than Adire:http://mobile.jlaudio.com/support_pages.php?page_id=163 I am currently deliberating with a few engineers on another forum, as well as discussing the issue with JL's chief engineer, Manville Smith. It's great controversy. |
|
Silver Member Username: N2audioLawrence, Ks USA Post Number: 640 Registered: Mar-04 | VP of marketing, but he's clearly in tune with what's going on technically. |
|
Silver Member Username: HomegrowncamWatauga, TX United States Post Number: 198 Registered: Jan-05 | Those are two ends of the spectrum. |
|
Silver Member Username: N2audioLawrence, Ks USA Post Number: 658 Registered: Mar-04 | he's not the typical marketing guy. He stays very in tune with the engineering and it's not hard to see when you read his posts. He doesn't just want to sell stuff, he wants to sell GOOD stuff, and he wants to know what makes it good. He's a regular contributor at carsound and posts at sounddomain once in a while too. |