Silver Member Username: Night_mirage
AmmanJordan
Post Number: 125
Registered: Jan-06
|
Posted on i was thinking about sx1250.1 but most of you said the subs would blow .
Can sx650.1 push them
two cvr 12" 4ohm |
Gold Member Username: Chaunb3400
Huntsville,
Alabama
U.S.
Post Number: 5431
Registered: Jul-05
|
Posted on JL Audio 1000/1 |
Silver Member Username: Night_mirage
AmmanJordan
Post Number: 126
Registered: Jan-06
|
Posted on thanks Chauncey but i can't buy anything else
just kicker
you have 4 sx1250.1 what do you think
do i have to buy sx1250.1 or sx650.1
for two cvr 12" |
Gold Member Username: Chaunb3400
Huntsville,
Alabama
U.S.
Post Number: 5435
Registered: Jul-05
|
Posted on would u be againts getting 2 amps???
Maybe a SX900.2
or
2 kx 400.1's |
Silver Member Username: Night_mirage
AmmanJordan
Post Number: 127
Registered: Jan-06
|
Posted on let me check .
its okay about prices
but can i use sx900 for mid (speakers) also .
you ment one sx900 right ?
|
Gold Member Username: Chaunb3400
Huntsville,
Alabama
U.S.
Post Number: 5438
Registered: Jul-05
|
Posted on yes 1 sx900.2 puts out 900x1 bridged @ 4 ohms
Run ur voice coils wired in series, and speakers wired in parallel and u will be fine
also what kind of mids will you use that require that much power??? |
Silver Member Username: Night_mirage
AmmanJordan
Post Number: 128
Registered: Jan-06
|
Posted on not that much power .
but is that true sx1250.1 maybe blow my two cvr
because i want this amp if i want to upgrade my sub's
i did n't bought any sub's or amp
what is your opinion ? about 1000$ budget .
for amp and two 12" sub's
Just kicker |
Gold Member Username: Chaunb3400
Huntsville,
Alabama
U.S.
Post Number: 5439
Registered: Jul-05
|
Posted on The sx900.2 would be perfect 900/2=450 into each sub, but if you want the sx1250 i don't blame you, they are very nice.
As for blowing your subs, They should not blow your subs if you set the gain correctly, and do not turn the volume up to high
Can you buy the new CompvX's yet???
If you can i would get 2 compvx's with a sx 1250. Because the new Zx amps are all not 1 ohm stable |
Silver Member Username: Night_mirage
AmmanJordan
Post Number: 129
Registered: Jan-06
|
Posted on but also sx1250.1 is stable @ 1 ohm
maybe i can get two 12" , But my question still not answerd ?
with sx1250.1 what is sub's ohm ?? 2 or 4 |
Silver Member Username: Night_mirage
AmmanJordan
Post Number: 130
Registered: Jan-06
|
Posted on i mean cvx |
Gold Member Username: Chaunb3400
Huntsville,
Alabama
U.S.
Post Number: 5490
Registered: Jul-05
|
Posted on two 4 ohm subs if you want to wire down to 1 ohm
 |
Gold Member Username: Tjmutlow
Post Number: 1488
Registered: Sep-05
|
Posted on Those vx subs, i would run a zx2500.1 on 2 dual 2ohm subs, or even a zx1500.1 |
Gold Member Username: Chaunb3400
Huntsville,
Alabama
U.S.
Post Number: 5496
Registered: Jul-05
|
Posted on If you get the cvr's get the 4ohm version and the sx1250.1
If you get the cvx's get the 2ohm version and the zx2500.1 |
Silver Member Username: Night_mirage
AmmanJordan
Post Number: 132
Registered: Jan-06
|
Posted on i already bought sx1250.1 befor 2 hours its sooooo nice .
but still not buying sub's
cvr's all said your amp will blow them .
So what do you think about two 06L5 12" 4ohm 600 RMS |