|
Anonymous | Where do i set my gain on my Viper D1200.1 my HU has 2.2v preamp output? And if i upgraded to a 4v preamp output HU where should i set it? |
|
Gold Member Username: B101Queen City, NC USA Post Number: 1092 Registered: Sep-05 | http://www.bcae1.com/gaincon2.htm REGISTER |
|
Anonymous | Im registered, but my amp's Input Sens. is 150mV to 8V so to match the volts of my HU i will have to turn the gain around 3/4 up right? |
|
Silver Member Username: SolacedagonyNew Jersey US Post Number: 812 Registered: Oct-04 | If it's 2.2v, set your amp to 2.2v. If it's 4v, set your amp to 4v. |
|
Anonymous | so the higher your HU volts are the higher you set your gain? |
|
Anonymous | bump |
|
Silver Member Username: N2audioLawrence, Ks USA Post Number: 574 Registered: Mar-04 | there are no voltage marks on the d1200.1 gain, but the sensitivity is 150mv to 8v. For a 2.2v hu you should be able to set it around 3/4, and 1/2 for 4v. I wouldn't go higher than that, but you can always go lower. |
|
Bronze Member Username: DavidalexanderGraham, Texas Us Post Number: 28 Registered: Dec-04 | i have an eclipse deck and it has a 5v pre out where should i set it |
|
Bronze Member Username: DavidalexanderGraham, Texas Us Post Number: 29 Registered: Dec-04 | i have an eclipse deck and it has a 5v pre out where should i set it |
|
Gold Member Username: Kd7nfrMontpelier, ID United States Post Number: 1478 Registered: Apr-05 | B: you're a gold member. Congradulations! |