Interchangable port how-to guide...for those who wanted one

marshall white Gold Member Username: Southernrebel Monroe, Louisiana USA Post Number: 2102 Registered: Mar-04	Posted on Monday, February 13, 2006 - 03:58 GMT there have been a few people emailing me about how to build boxes w/ interchangable ports. i just finish a box w/ these ports, so i took some pics of the build and made a how-to guide. enjoy. http://www.cardomain.com/ride/650399/6
.'~DAYE£?~'. Gold Member Username: 54danny54 Betsy layne, Kentucky..GO... USA duh Post Number: 1753 Registered: Nov-04	Posted on Monday, February 13, 2006 - 04:09 GMT yo marshall, i know ur asked this alort but wuts the DB's ur SX hits lol?
marshall white Gold Member Username: Southernrebel Monroe, Louisiana USA Post Number: 2103 Registered: Mar-04	Posted on Monday, February 13, 2006 - 04:26 GMT after box rise the SX15 sees ~750wrms on burps...i did 148.0db @48hz at the last comp i went to, but i made a few changes to the box...hopfully i'll gain a lil. i have a comp on the 24th...the guy in that how-to guide will be there w/ me too, he will be in SS301-900. i hooked those 2 L5 15's to my jbl bp1200.1 for a lil bit and it was pretty loud. w/ the SPL port in i'm guessing he should be in the high 140s easily.
Trevor Eaton Gold Member Username: Tdeaton1021 Near Tampa, Florida USA Post Number: 1806 Registered: Sep-04	Posted on Monday, February 13, 2006 - 04:43 GMT you do good work marshal. how long did it take you to build that box? i actually do want to do interchangable ports on my next enclosure. the only thing im worried about is it will be bent like an L and im afraid it wont fit because it wont drop straight in. very good "how to" though.
marshall white Gold Member Username: Southernrebel Monroe, Louisiana USA Post Number: 2104 Registered: Mar-04	Posted on Monday, February 13, 2006 - 04:48 GMT thanks trevor, and L-shaped drop in port will work just fine...you just have to think it through when you build it. infact...my daily port is L-shaped http://www.cardomain.com/ride/650399/1
.'~DAYE£?~'. Gold Member Username: 54danny54 Betsy layne, Kentucky..GO... USA duh Post Number: 1754 Registered: Nov-04	Posted on Monday, February 13, 2006 - 04:53 GMT yo trevor...u have had experience with the Ava.. what would u say is the ball park figure of tuning for comps u reccomend at 5 cubes?(i know wierd wording but im stressed cause i corrupted windows and lost every bit of info i had)
Trevor Eaton Gold Member Username: Tdeaton1021 Near Tampa, Florida USA Post Number: 1808 Registered: Sep-04	Posted on Monday, February 13, 2006 - 05:03 GMT i dont know really. i guess like 45hz-50hz. remember the ava isnt an SPL driver and the higher you go it will begin to dropoff. id find out the cas res. freq. and remember if ur doing interchangable ports your net cuft will change with a different port.
.'~DAYE£?~'. Gold Member Username: 54danny54 Betsy layne, Kentucky..GO... USA duh Post Number: 1755 Registered: Nov-04	Posted on Monday, February 13, 2006 - 05:07 GMT yea i kno...il try 2 experoment
.'~DAYE£?~'. Gold Member Username: 54danny54 Betsy layne, Kentucky..GO... USA duh Post Number: 1757 Registered: Nov-04	Posted on Monday, February 13, 2006 - 05:24 GMT marshall man...u know how to build a box well man, looks complicated
Joseph Lewis Silver Member Username: Jprix82 Post Number: 130 Registered: Jan-06	Posted on Monday, February 13, 2006 - 07:37 GMT hey marshall how did you figure out the port size?
B Gold Member Username: B101 Queen City, NC USA Post Number: 1038 Registered: Sep-05	Posted on Monday, February 13, 2006 - 10:39 GMT looking real good marshall; now you need to start selling them on Ecousticcs! =D
marshall white Gold Member Username: Southernrebel Monroe, Louisiana USA Post Number: 2106 Registered: Mar-04	Posted on Monday, February 13, 2006 - 18:15 GMT B, if people are willing to buy them...i am more than willing to sell Joseph, i use winISD and a lil geometry is all. its hard to explain in words...but if i had someone watching me build the box, its easier to understand. you just have to factor in port and sub displacments when designing the enclosure.
S.P.D Bronze Member Username: Scott_debaker Pittsburgh, P.A. U.S.A. Post Number: 70 Registered: Feb-06	Posted on Monday, February 13, 2006 - 19:36 GMT if u want changable ports all u do is make a big seald box but use pvc pipe ports like say u want 32hz put 2 4inch pvc in it then u want ur cars top fre. then u make 1 for that an w/e else u want but make sure u dont glue it an u can get changin it 2 ur liking thats what iam goin 2 do
marshall white Gold Member Username: Southernrebel Monroe, Louisiana USA Post Number: 2121 Registered: Mar-04	Posted on Tuesday, February 14, 2006 - 21:17 GMT BUMP!!!!!
/\/\ike Silver Member Username: Mixmastaspig Canada, Canada Canada Post Number: 378 Registered: Sep-05	Posted on Tuesday, February 14, 2006 - 21:23 GMT Sweet deal on the box dude
Joseph Lewis Silver Member Username: Jprix82 Post Number: 134 Registered: Jan-06	Posted on Wednesday, February 15, 2006 - 04:21 GMT Anyway nice guide now all you need to make is a guide on how to figure out port sizes lol i know that it would help alot of people.

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us