|
Silver Member Username: Southern_bassParis, Tennessee U.S. Post Number: 778 Registered: Dec-05 | hey guys im about to start building a box for my new sx. After work tomorrow im going to lowes to get my supplies and before i start on it i was wondering if anyone here has pics of a box for a sx and maybe some dimensions |
|
Gold Member Username: SouthernrebelMonroe, Louisiana USA Post Number: 1822 Registered: Mar-04 | 4cu ft tuned to 32hz w/ 45sq inches of port...that would be a great box for it. what is your max length, width, and height you have to work w/....i'll send you some demenions |
|
Silver Member Username: Southern_bassParis, Tennessee U.S. Post Number: 785 Registered: Dec-05 | i really dont have any dimensions right now...i have a single cab truck and im wanting to trade it in on something else but just dont know what kind of vehicle so i really dont have any dimensions |
|
Silver Member Username: Southern_bassParis, Tennessee U.S. Post Number: 796 Registered: Dec-05 | but if anyone has any pics or has built one any input here is greatly appreciated |
|
Silver Member Username: Southern_bassParis, Tennessee U.S. Post Number: 805 Registered: Dec-05 | bump |
|
New member Username: MgreeneMaple Grove, Minnesota United States Post Number: 1 Registered: Jan-06 | https://www.ecoustics.com/electronics/forum/car-audio/189442.html theres my SX12 |
|
Silver Member Username: Southern_bassParis, Tennessee U.S. Post Number: 812 Registered: Dec-05 | hey man...how you liking your sx ? |
|
Gold Member Username: SouthernrebelMonroe, Louisiana USA Post Number: 1824 Registered: Mar-04 | how tall, wide and deep can the box be? (bottom and top depth) its is going to be hard, if not impossible to get a large enough box for that SX15 to fit behing your seat. you are going to want AT LEAST 3cuft (net)...so before displacements the box will be ~3.5cuft (gross). |
|
New member Username: MgreeneMaple Grove, Minnesota United States Post Number: 5 Registered: Jan-06 | i like it a lot even though my amp died on me i think... i know its not the sub cause i tried it on my friends amp. but it has better SQ then most people say it does. people usually think its a SPL cause there used in comps and stuff but id buy another in a second if i had the money. |
|
Gold Member Username: SouthernrebelMonroe, Louisiana USA Post Number: 1828 Registered: Mar-04 | same here RESX12...i really like the way my SX sounds too. its no brahma, but it still sounds pretty dam good. |
|
Gold Member Username: Chaunb3400Huntsville, Alabama U.S. Post Number: 4311 Registered: Jul-05 | Why did u change ur name, mike??? |
|
Silver Member Username: Southern_bassParis, Tennessee U.S. Post Number: 822 Registered: Dec-05 | yeah marshall i saw the deal on the sx when the group buy was on and i couldnt resist...lol |
|
Gold Member Username: CenusHicksville, Ohio Usa Post Number: 1063 Registered: Jan-05 | how would the sx compare to the AA atlas in sq and spl, cause im trying to convince my friend into buying one, so im trying to get an idea of what to compare the sx to, my setup is 2 15inch aa atlas's, sealed, and hes debating between a 12 ported or a 15 sealed. |
|
Silver Member Username: Southern_bassParis, Tennessee U.S. Post Number: 827 Registered: Dec-05 | putting a sx sealed ? |
|
Gold Member Username: RovinTrinidad & T... Post Number: 4848 Registered: Jul-05 | together with all the great advice above imo i'd use 1" mdf ................ |
|
Silver Member Username: FrkkevinFort Worth, Texas US Post Number: 160 Registered: Nov-05 | That would be the best choice, either or double 3/4 up. If you use just 3/4 prepare yourself for bracing. |
|
Gold Member Username: CenusHicksville, Ohio Usa Post Number: 1064 Registered: Jan-05 | he can't fit a big enough box for a 15 ported, so he was going sealed, or a ported 12. |
|
Silver Member Username: Baseball1187Columbia, SC Post Number: 536 Registered: Dec-04 | Tyler, the SX would win over the Atlas in output, but the reverse would be true for SQ. |
|
Gold Member Username: SouthernrebelMonroe, Louisiana USA Post Number: 1833 Registered: Mar-04 | i would go w/ a ported SX12 before i would do a sealed SX15. i ran my SX15 in sealed box when i went on vacation this past summer (i needed my back seat)and i'll tell you straight up...SX's dont like sealed boxes. SX's sound pretty darn good...but XBL^2 subs sound better. (period) on the flipside, SX's are more efficient than XBL^2 subs (louder w/ a given amount of power) |
|
Gold Member Username: CenusHicksville, Ohio Usa Post Number: 1069 Registered: Jan-05 | thats what i was thinking but just wanted to make sure, what kind of box would you recomend he can fit a 2.5cf box, so i was thinking 2.5cf tuned to 32-35hz |
|
Gold Member Username: CenusHicksville, Ohio Usa Post Number: 1070 Registered: Jan-05 | mabey it'll bump it this time. |
|
Gold Member Username: SouthernrebelMonroe, Louisiana USA Post Number: 1843 Registered: Mar-04 | 2.5cuft tuned to 32-35hz would be perfect for an SX12. |
|
Gold Member Username: CenusHicksville, Ohio Usa Post Number: 1071 Registered: Jan-05 | awsome, now all i have to do is convince my friend to get rid of his pos kenwood amp. |
|
Silver Member Username: Southern_bassParis, Tennessee U.S. Post Number: 850 Registered: Dec-05 | marshall i cant get ur videos to come up in the putfile |
|
Gold Member Username: SouthernrebelMonroe, Louisiana USA Post Number: 1846 Registered: Mar-04 | only 1 is working for some reason...i'm gonna make some new vids soon. i have a vid of a friend (Pat) doing 161.x at a show that i'm gonna upload soon. here is the 1 vid that is working: http://media.putfile.com/subway43 |
|
Silver Member Username: Southern_bassParis, Tennessee U.S. Post Number: 862 Registered: Dec-05 | alright thx...im getting really anxious to get the sx up and going |