Wiring

nathan New member Username: Lethargic_nate Sioux falls, Sd Us Post Number: 2 Registered: Jan-06	Posted on Sunday, January 08, 2006 - 06:34 GMT Im going to get a rockford P40004 amp to power four speakers. im going to wire a 6 1/2 and a 6x9 in parellel into one channel and the same for the other and hopefuly brige em. how do i make sure that the amp will recognize left and right sound to the sets? one set is right side of the rear car and other is the left.
ty mutlow Silver Member Username: Tjmutlow Post Number: 907 Registered: Sep-05	Posted on Sunday, January 08, 2006 - 13:37 GMT cant do it, that amp is not stable 2ohms bridged
nathan New member Username: Lethargic_nate Sioux falls, Sd Us Post Number: 3 Registered: Jan-06	Posted on Sunday, January 15, 2006 - 17:00 GMT it says its 2 ohm stable though
ty mutlow Gold Member Username: Tjmutlow Post Number: 1017 Registered: Sep-05	Posted on Monday, January 16, 2006 - 20:43 GMT only stereo mode.... not bridged
Optidriven Silver Member Username: N2audio Lawrence, Ks USA Post Number: 333 Registered: Mar-04	Posted on Wednesday, January 18, 2006 - 20:11 GMT get the 3002 or the 5002 instead, then you can run them at 2 ohms stereo - each speaker would get 75 or 125w a piece.
nathan New member Username: Lethargic_nate Sioux falls, Sd Us Post Number: 5 Registered: Jan-06	Posted on Saturday, January 21, 2006 - 01:18 GMT ok thanks for the info, but the other thing is will the speakers recognize the difference between left and right sound?

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us