Jensen amp

 

Bronze Member
Username: Bus212

Kingsford, Michigan Us

Post Number: 53
Registered: Jun-05
HEy my budyd of my gave me his jensen 300 watt pro amp model ps475. Has anyone used this amp before and is it any good. I wanna power two audiobahn 10 inch model AW1051SE with it. Any advice on a better cheap amp? Or is this amp alright
 

Silver Member
Username: N2audio

Lawrence, Ks USA

Post Number: 181
Registered: Mar-04
it's not a bad amp at all, but it doesn't match up well with those subs. Tha amp will do about 180x2 bridged, but that's only at 4 ohms. Your DVC 4's can only be wired to 2 or 8 ohms a piece.
You'd be forced to run your subs at 8 ohms since the amp isn't stable at 2 ohms bridged and you'd only get about 90w per sub.

Better options would be a big 2 ch amp that bridges to about 600x1 at 4 ohms, or a mono amp that does around 600w at 1 ohm.

These would be great budget amps for you --
http://ikesound.com/product-product_id/2426
http://ikesound.com/product-product_id/2286
http://ikesound.com/product-product_id/2119
http://ikesound.com/product-product_id/2822
http://ikesound.com/product-product_id/3359
the CL800 from http://profilecaraudio.com/amplifiers.htm
 

Bronze Member
Username: Bus212

Kingsford, Michigan Us

Post Number: 54
Registered: Jun-05
Hey i also have p3002 rockford fosgate amp would this be a better option for these subs. Also i wanted to hook up the two f12 kickers 4 ohm there an older model stillwater design. I would need two amp to run both pairs hey?
 

Bronze Member
Username: Redbone15367

Mo U.S.A.

Post Number: 82
Registered: Sep-05
you could do serie's on each sub and then paralel to amp http://mobile.jlaudio.com/support_pages.php?page_id=161 try this out
 

Bronze Member
Username: Bus212

Kingsford, Michigan Us

Post Number: 55
Registered: Jun-05
thanks for the diagram but i dont think the p3002 rockford would have enough power to run all 4 by itself. So i think im just going to buy another p3002 and run 2 amps.
 

Bronze Member
Username: Redbone15367

Mo U.S.A.

Post Number: 85
Registered: Sep-05
I had a rf 100ia i beleave that was it, running 4 orion dvc 12's when i owned my peterbuilt. it would handle it for about 1.5 hr's before shutting down. It hit hard for a semi, could see the sleeper flex from out side about 1/2 inch.
 

Gold Member
Username: Chaunb3400

Huntsville, Alabama U.S.

Post Number: 3855
Registered: Jul-05
so u want to wire 2 sets of diffrent subs???
 

Bronze Member
Username: Bus212

Kingsford, Michigan Us

Post Number: 56
Registered: Jun-05
ya to two different amps though.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us