|
Bronze Member Username: QuigPittsburgh, Pa Us Post Number: 37 Registered: Sep-05 | ok i have 2 15's volfenhag dual voice coils... i wanted to know if anyone can make a quick diagram on how they should be wired for 2 ohms.... right now they are in the box and stuff(i bougth them off smoeone) and they have seperate channels, so im assuming there nto wired for 2 ohms... correct me if im wrong but for 2 ohms dual voice coils u only need one channel correct? and another question.... if you have a 2 channel 2000 watt amp and u only use 1 channel, does the 1 channel put out (the supossably 2000 watts) or just 1000 watts? |
|
Bronze Member Username: QuigPittsburgh, Pa Us Post Number: 38 Registered: Sep-05 | dam... forgot to mention, the subs are 4 ohms |
|
Silver Member Username: TheelfkeeperStockbridge, GA USA Post Number: 802 Registered: Feb-05 | http://www.rockfordfosgate.com/rftech/wiringwizard.asp?WoofQty=2+woofers&WoofImp =Dual+Voice+Coil+-+2+ohms+x+2&image.x=20&image.y=9&image=Submit theres a diagram of your options, the 2nd one is wired at 2 ohms. and it depends on the amp as to what it'll put out, what kind of amp do you have?? brand and model. |
|
Bronze Member Username: QuigPittsburgh, Pa Us Post Number: 39 Registered: Sep-05 | ahh im at school rite now but its a volfenhag 2000 watt.... im gona take a guess at the model... zx710 maybe |
|
Bronze Member Username: QuigPittsburgh, Pa Us Post Number: 40 Registered: Sep-05 | ahh im at school rite now but its a volfenhag 2000 watt.... im gona take a guess at the model... zx710 maybe |
|
Silver Member Username: TjmutlowPost Number: 846 Registered: Sep-05 | run that amp stereo, 1 speaker to each channel and wire parallel, neg to neg and positive to positve for each speaker, then 1 speaker to each channel. |
|
Bronze Member Username: QuigPittsburgh, Pa Us Post Number: 41 Registered: Sep-05 | ok wat exactly does ohm load mean... |
|
Silver Member Username: N2audioLawrence, Ks USA Post Number: 178 Registered: Mar-04 | the resistance the amplifier is seeing. your amplifier can run a pair of dvc4's in one of two ways...2 ohms stereo - which is one sub with coils in parallel on each channel. It would look like this, twice - http://img.photobucket.com/albums/v637/Liquid_force/DVC_Parallel_1.gif or, the way I would recommend, is to bridge the amp, and wire the subwoofers parallel for a 4 ohm mono load, like this-- http://img.photobucket.com/albums/v637/Liquid_force/DVC_Series_par.gif |